Page 1 of 1
welding bead sequence for pipe to plate or socket weld joint
Posted: Tue Aug 16, 2011 11:09 pm
by Sftyvlv
How do you fellas weld pipe to plate, when the plate is in a vertical position and the pipe axis horizontal. Or a socket weld joint when both fitting and pipe are in a horizontal axis? Specifically stringer beads with stick.
Thanks Sftyvlv
Re: welding bead sequence for pipe to plate or socket weld j
Posted: Mon Oct 31, 2011 3:11 am
by TheExpert
The end of the pipe must first be cut square. Wrap a piece of heavy paper around it tightly, aligning the edge of the paper. Scribe a line around the pipe and cut, grind or file to that line. If possible drill a hole in the plate centered on the pipe and run threaded rod through the plate and pipe to clamp it for welding. Tack weld on opposing sides in several places and weld in segments on opposing sides to equalize warpage.