Page 1 of 2

How can welders help with virus?

Posted: Mon Mar 02, 2020 11:32 am
by VA-Sawyer
Is there something we can make?, some service we can offer?
How can we make a positive difference?

Re: How can welders help with virus?

Posted: Mon Mar 02, 2020 11:39 am
by VA-Sawyer
Thinking I will start eating at the welding bench. Set out the food, tig for 10 minutes, and let that strong UV do its thing to any virus.

Re: How can welders help with virus?

Posted: Mon Mar 02, 2020 11:45 am
by ljdm1956
Get everybody together and weld up the tallest fence all around the country. Weld up the gates at airports, sea ports, etc. Deal with who has the virus already in the U.S, until they figure out where the virus came from, and how to cure it. Doable? Dunno, but you asked what welders can do to help.

Re: How can welders help with virus?

Posted: Mon Mar 02, 2020 4:28 pm
by Poland308
Take three weeks off work at the same time(quarantine).

Re: How can welders help with virus?

Posted: Tue Mar 03, 2020 1:50 pm
by ex framie
Dont be part of the problem.
If sick stay home.
Practice a good level of hygiene, wash hands often, clean down with sanitiser shared areas, ie lunch tables, work desks, phones etc.
And above all PANIC, it will let the media think they are useful, maybe not.
Less than 200,000 cases out of 7.4 billion, with a less than 10% death rate, its not quite the 1917 to 1920 spanish flu pandemic that killed 20 million is it.

Re: How can welders help with virus?

Posted: Tue Mar 03, 2020 5:42 pm
by BillE.Dee
was this "virus" here before and the health care pros have over looked it as a different strain until the hysteria struck? Dunno for sure, but it is certainly turning up in places where no one brought it in and no one was associated with anyone that already contracted it. Pay attention and practice good hygiene.

Re: How can welders help with virus?

Posted: Wed Mar 04, 2020 8:51 pm
by Poland308
ex framie wrote:Dont be part of the problem.
If sick stay home.
Practice a good level of hygiene, wash hands often, clean down with sanitiser shared areas, ie lunch tables, work desks, phones etc.
And above all PANIC, it will let the media think they are useful, maybe not.
Less than 200,000 cases out of 7.4 billion, with a less than 10% death rate, its not quite the 1917 to 1920 spanish flu pandemic that killed 20 million is it.
Yup death rate is only about 2%. Mostly older men. Made sure my life insurance was paid up. Rolling the dice and washing my hands. Good knowing you all.

Re: How can welders help with virus?

Posted: Wed Mar 04, 2020 9:22 pm
by Coldman
Can I have your welder?

Re: How can welders help with virus?

Posted: Wed Mar 04, 2020 10:56 pm
by Poland308
If I die from the virus yes.

Edit

It has to be a proven and confirmed case. But the US doesn’t yet have a way to rest for the virus. So don’t hold your breath.

Edit
Plus you still have to pay for shipping!

Re: How can welders help with virus?

Posted: Wed Mar 04, 2020 11:14 pm
by Coldman
Just hoops. I know how to jump. :)

Re: How can welders help with virus?

Posted: Wed Mar 04, 2020 11:30 pm
by Poland308
Coldman wrote:Just hoops. I know how to jump. :)
Good luck my friend may the least sick man win!

Re: How can welders help with virus?

Posted: Thu Mar 05, 2020 12:51 am
by Coldman
+1

Re: How can welders help with virus?

Posted: Thu Mar 05, 2020 6:37 pm
by BillE.Dee
Josh, I can drive there long before coldman can row his canoe from Oz. I win.

Re: How can welders help with virus?

Posted: Thu Mar 05, 2020 7:47 pm
by Coldman
No backsies.
I got dibs.

You can get his gloves and underwear.

Re: How can welders help with virus?

Posted: Thu Mar 05, 2020 8:33 pm
by Poland308
:lol:

Re: How can welders help with virus?

Posted: Thu Mar 05, 2020 9:44 pm
by ex framie
Whats that old skit?
Hangon, Im not dead yet.......

Re: How can welders help with virus?

Posted: Fri Mar 06, 2020 12:58 am
by VA-Sawyer
When I started this thread, I was seriously hoping for suggestions on some projects we could do to help.
Maybe something like a SS table for the triage tent at the hospital.

Just playing with a few numbers..... the flu typically kills 30,000 to 40,000 each year in the US. About the same as get killed on US highways each year. It has a fatality rate of about .1%

The Coronavirus has a fatality rate of about 3.4% (34 times higher than the flu) If the same number of people catch it, as catch the flu....... then we are talking close to 1.4 million deaths.
Now for the really bad news......... humans have some immunity to the flu, because we have been exposed to it for years. This reduces the number of folks that get sick each year.
We have no acquired immunity from the Coronavirus. It is quite possible that a lot higher percentage of the population will get it.
3.4 % of the US population is over 10 million people.
Maybe we need to be welding up a bunch of crematoriums.

Re: How can welders help with virus?

Posted: Fri Mar 06, 2020 2:58 pm
by BillE.Dee
Sawyer, the info that is being fed to US is not complete. They are trying to give numbers gained across the world and comparing them with the info from the states. They are saying so many people died in china, BUT, they don't say what they died from. I can't believe that the virus hasn't been around for a while and now, since an election year, they are "pretending" to care and use numbers that they don't even know what they are.
Besides, I don't want Josh's underwear...I'd look like big foot in a thong.

Re: How can welders help with virus?

Posted: Fri Mar 06, 2020 4:13 pm
by LtBadd
Most of the deaths are older folks with health problems already, some get the flu and have mild symptoms and recover fast.

Much to yet be known, do not panic, carry on...

Re: How can welders help with virus?

Posted: Fri Mar 06, 2020 11:47 pm
by Poland308
Old and male are the high risk pool. Good knowing you all.

Re: How can welders help with virus?

Posted: Sun Mar 08, 2020 8:01 am
by BillE.Dee
It just seems that the virus is acting much like any other virus...knocks the heck out of those who suffer from pre-active conditions or compromised conditions.
Josh, IF anything happens to me, I've ordered my bride to send you my thong, will it be ok?.....depends

We can all horse around (It's my nature,,been thru too much) to make life enjoyable. Pay attention, practice good hygiene, stay safe and carry on.

Re: How can welders help with virus?

Posted: Sun Mar 08, 2020 8:42 am
by Bill Beauregard
Poland308 wrote:Old and male are the high risk pool. Good knowing you all.
Jesus! It'll be my son's dream come true. He thinks he will get to take over all my toys. I told his mother to sell it all.

Willie

Re: How can welders help with virus?

Posted: Sun Mar 08, 2020 2:30 pm
by VA-Sawyer
Before you two old farts hang up your spurs, kick the bucket, or ride off into the sunset....

Tell us a bit more about yourself. That way we will miss you even more.

Re: How can welders help with virus?

Posted: Sun Mar 08, 2020 4:31 pm
by Coldman
Nah, just post up a pic of your welder.

Re: How can welders help with virus?

Posted: Sun Mar 08, 2020 4:51 pm
by VA-Sawyer
Dangit Coldman,
I was going to let them post nice biographies, then tell them all we wanted to know, was the address and alarm codes for their shop.
You let the cat out of the bag too soon.