I currently have a Hobart Handler 150, original 220v transformer based MIG, a Dynasty 200DX/coolmate 400 and a MM350P with a 25' XR-Aluma Pro and a Bernard Q300 gun and a Hypertherm Powermax 45.
Getting older, not doing anywhere as much as planned. Haven't powered up the welders for 4 years after moving. The Dynasty replaced a old Miller Econo-Twin HF and the Hobart was the first mig.....
The Handler 150 is very nice, but maybe not as versatile as I would like and 220v only. The 350P is obviously more than I need, but it's a great machine.
Dielima, I have considered selling the 150 and 350P and possibly replacing with a Millermatic 255. I like the idea of experimenting with pulsed MIG. For years I had an eye on the Multimatic 215, but didn't think I really need the multi process. With that, the 200DX will do 150A TIG & 130A DC stick @60% and the Multimatic 255 will do 275A TIG & 200A stick @60%.
I guess I need to decide on the TIG needs, because I should be able to get by on thick material with ⅛ stick multipass @130A.
Any thoughts or recommendations?
