General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
With a Tearful Eye. . .
Post Reply
TamJeff
  • Posts:
  • Joined:
    Tue Dec 04, 2012 4:46 am

I present, my youngest son's, first aluminum TIG beads. *snif*

"Watch the sides, watch the sides. . ." 220 amps AC, 1/8" pure, 5356 filler.
Image

He's already built a couple easy parts from 1" anodized pipe and the welds were satisfactory enough for sale. 1 hour of training at most for the welds above, a couple days teaching geometry/fractions/tape measure, usable sides of cut lines etc for the real work.

Image

Proud Pappa!
Miller ABP 330, Syncrowave 250, Dynasty 300 DX.
Honorary member of the Fraternity of Faded Tee Shirts.
Top
delraydella
  • Posts:
  • Joined:
    Mon Apr 25, 2011 7:35 pm
  • Location:
    Detroit, MI

Nice job! Are you handing out cigars?
Welding☞Syncrowave 250,Millermatic 252,30a Spoolgun Cutting☞12" Hi-speed Cutoff Saw, 9x 12 Horizontal Bandsaw Milling☞Gorton 8d Vertical Mill Turning☞Monarch EE Precision Lathe Grinding ☞Brown & Sharpe #5 Surface Grinder
Top
Post Reply

Return to “Welding Forum General Shop Talk”