Page 1 of 1
Brush Replacement
Posted: Sat Jun 15, 2013 7:16 pm
by Sgfpat
Narrowed my problem down to the DC brushes what am I looking at to do it myself ? And how many brushes are on the DC side? The manual didn't specify how many just a part number.
Re: Brush Replacement
Posted: Sat Jun 15, 2013 7:42 pm
by Otto Nobedder
It'll be an even number, either two or four. Wouldn't hurt to break it down first and look at them, so you know on sight if the replacement parts are right.