Page 1 of 1
Portable pipe and plate bevel tool.
Posted: Wed Jun 19, 2013 1:07 am
by WerkSpace
The guys at the Western Manufacturing Technology Show
were demonstrating their portable pipe and plate beveling tool.
http://www.youtube.com/watch?v=OwcrIKpWv78
Re: Portable pipe and plate bevel tool.
Posted: Wed Jun 19, 2013 8:11 am
by delraydella
Very nice! Every time I see a product like that, I always think "Now why didn't I think of that??"
Re: Portable pipe and plate bevel tool.
Posted: Wed Jun 19, 2013 6:43 pm
by Otto Nobedder
That's a GREAT idea!
Steve S
Re: Portable pipe and plate bevel tool.
Posted: Tue Jun 25, 2013 2:53 am
by sunniva
just bought a everlast 140, primarily to use practicing tig. I would like affordable recommendations for a flow meter that will provide argon for the tig torch as well as a second output to use for purge or gas flow for the back of the weld. I am unemployed and have limited resources, hope I can find one for $100 or less.
Re: Portable pipe and plate bevel tool.
Posted: Tue Jun 25, 2013 6:57 pm
by Otto Nobedder
Sunniva, I built my own.
Flowmeters can be had on e-bay for $10 ea. or less.
My setup here, with discussion:
(Ignore the first pic... NOT mine!)
http://forum.weldingtipsandtricks.com/v ... f=5&t=2092