General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
Merry Christmas
Post Reply
User avatar
  • Posts:
  • Joined:
    Sat Mar 30, 2013 11:49 am
  • Location:
    Sweden

Merry Christmas and a Happy New Year 2015
DSC_0326.jpg
DSC_0326.jpg (272.89 KiB) Viewed 934 times
Thanks all for sharing your knowledge and making this site a great place.
I know most of you have your big day the 25:th but our's begin in less than 2 hours
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

merry christmas
hope you are good at uphill.....
craig
MERRY CHRISTMAS TO ALL YOU GREAT GUYS
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Indeed, Merry Christmas, Happy Chanukah, Blessed Kwanzaa, to all who celebrate each!

And for you overly politically correct folk (you know who you are), I wish you an unoffensive politically correct non-denominational "Happy Holiday!"

:D

Steve S
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 10:13 pm
  • Location:
    Eddy, TX

Steve,
Why do I get the feeling you might be tallking about me :o :lol: ;)

Here is one better, Merry New Year!!
-Jonathan
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

LOL!

I meant no one in particular. I was just covering my ass with the PC crowd that won't risk offending anyone for any reason.

Steve S
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

I, on the other hand, will happily offend anyone, without reason.

I'm just being kind on the "holiday"... :roll:

Steve S
Top
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

Let her rip and let the time ones who will be offended sort it out.
Top
newschoppafowah
  • Posts:
  • Joined:
    Wed Feb 19, 2014 11:54 pm

Merry Christmas to a great bunch of guys and a great wealth of knowledge!
Sent from an earthen ditch outside Needles, CA using an awful lot of low voltage single strand wire.

It's a matter of flour and water and then there's the seasonings, which is a matter of salt and so forth and then you h-we interrupt this for the announc
Top
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

Exactly Merry Christmas to all my welding brothers
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
Top
jwright650
  • Posts:
  • Joined:
    Wed Dec 03, 2014 3:27 pm

AndersK wrote:Merry Christmas and a Happy New Year 2015
DSC_0326.jpg
LOL..love the pic! ...and Merry Christmas back atcha.
John Wright
AWS Certified Welding Inspector
NDT Level II UT, VT, MT and PT
NACE CIP Level I Coating Inspector
Top
sigfreed14
  • Posts:
  • Joined:
    Sun Dec 21, 2014 12:30 am

Look what I I found under the tree. A 3 lb box of Unatainum rods Thanks santa I could not find them on onebay. boy o boy now I can weld Anything?
Top
User avatar
  • Posts:
  • Joined:
    Sat Mar 30, 2013 11:49 am
  • Location:
    Sweden

Hehe, yeah you're right welding is only about materials. :roll:

I got a new pair Peltor hearing caps, said thanks to my wife and added now I can use one pair in here :lol:
Top
User avatar
  • Posts:
  • Joined:
    Tue Jun 26, 2012 8:05 pm

I got a very unusual gift this year. It doesn't look like much, but it has potential.
I've attached the before and 'after' pictures, along with a youtube clip of what it should do.
https://www.youtube.com/watch?v=feoiwE05vpA I really needed another project. :roll:
Attachments
Bede2.JPG
Bede2.JPG (61.49 KiB) Viewed 778 times
DSCN1226.jpg
DSCN1226.jpg (43.6 KiB) Viewed 778 times
Top
Artie F. Emm
  • Posts:
  • Joined:
    Thu Jul 24, 2014 7:53 am

Otto Nobedder wrote:I was just covering my ass
By covering your @ss you've offended the nudists.

Merry Christmas to all. Insert your holiday or preferred word as you like!
Dave
aka "RTFM"
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Okay, now a BD-5 is quite the Christmas present.

Was she asking for more life insurance on you this year? :lol:

Steve S
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Artie F. Emm wrote:
Otto Nobedder wrote:I was just covering my ass
By covering your @ss you've offended the nudists.

Merry Christmas to all. Insert your holiday or preferred word as you like!
Lesser of two evils... Exposing it would likely offend far more people...
Top
User avatar
  • Posts:
  • Joined:
    Tue Jun 26, 2012 8:05 pm

Technically, it's still a pile of aluminum parts. I know the history of the BD5 and many pilots died in them.
With a stall speed of 85mph and top speed of 300mph, I can see where there's a lot of room for error.
A sudden engine failure and then trying to maintain 85mph to keep the plane flying would be a challenge.

The aircraft plans were more important to me than anything.
This aircraft has a lot in common with the LiteStar Pulse motorcycle.
https://www.youtube.com/watch?v=d3tYEoWGtdM

The BD5-A version has a 17ft wingspan, while the B version had a 21.5ft wingspan.
The wings are removable and can be installed within 15 minutes.
Why not a larger sailplane wingspan? This afterall, is an experimental aircraft.
I'm really not sure what to do with this project, but I have lots of ideas.
Otto Nobedder wrote:Okay, now a BD-5 is quite the Christmas present. Was she asking for more life insurance on you this year? :lol: Steve S
Attachments
LiteStar pulse fleet.jpg
LiteStar pulse fleet.jpg (43.9 KiB) Viewed 760 times
Top
Wes917
  • Posts:
  • Joined:
    Fri Oct 25, 2013 11:45 pm

WerkSpace wrote:I got a very unusual gift this year. It doesn't look like much, but it has potential.
I've attached the before and 'after' pictures, along with a youtube clip of what it should do.
https://www.youtube.com/watch?v=feoiwE05vpA I really needed another project. :roll:
<----this guy is jealous, all I got was the bill for everyone else lol.

Merry Christmas everyone
Top
Post Reply

Return to “Welding Forum General Shop Talk”