Received mine today and my initial opinion is it is really light big plus, second is the controls are back lit for easy viewing when making adjustments, comes standard with a grind mode big thumbs up the viewing area is large and very clear, the head gear is comfortable for me and what a really like, is the detent to help hold it up but is super easy to bring down for weld with no hands.
For a hood under $200 it is a awsome value
General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
inside the helmet some have clips or tabs on the sides of the
lenses to slip in a magnify lenses instead of glasses.
craig
lenses to slip in a magnify lenses instead of glasses.
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
- TRACKRANGER
-
Weldmonger
-
Posts:
-
Joined:Wed Aug 06, 2014 12:48 am
-
Location:Melbourne, Australia
It looks like there are possibly a groove on each side for a magnifier.
- Groove/channel each side for a magnifier?
- 2015-03-10_11-01-10.jpg (26.51 KiB) Viewed 1383 times
EWM Phonenix 355 Pulse MIG set mainly for Aluminum, CIGWeld 300Amp AC/DC TIG, TRANSMIG S3C 300 Amp MIG, etc, etc
- TRACKRANGER
-
Weldmonger
-
Posts:
-
Joined:Wed Aug 06, 2014 12:48 am
-
Location:Melbourne, Australia
Yes, I was answering Craig's question: "are there tabs to put a magnifier lens inside?"angus wrote:that's what they are there for.
EWM Phonenix 355 Pulse MIG set mainly for Aluminum, CIGWeld 300Amp AC/DC TIG, TRANSMIG S3C 300 Amp MIG, etc, etc
Craig, duct tape works well in any hood if slots are missing.
Remember mechanics first ground rules:
Duct tape for everything loose that shouldnt.
WD40 for everything stuck that shouldnt
Remember mechanics first ground rules:
Duct tape for everything loose that shouldnt.
WD40 for everything stuck that shouldnt
Pictures from my scrap collection:
http://forum.weldingtipsandtricks.com/v ... f=9&t=5677
http://forum.weldingtipsandtricks.com/v ... f=9&t=5677
Return to “Welding Forum General Shop Talk”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities