I've taken an interest in "Tiny Homes"
and found this video for a DIY heater.
https://www.youtube.com/watch?v=f2l4oekiuPY
For anyone interested in the more efficient "Rocket Stoves"
https://www.youtube.com/watch?v=7DXp1G5DySE
General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
I definitely like the rocket stove design. Quite clever.
If I still lived in a northern climate, I'd have to build one.
I'm considering adapting the design for a boiler, to drive a small generator and produce distilled (or at least sanitary) water, though, as I live in hurricane country.
Steve S
If I still lived in a northern climate, I'd have to build one.
I'm considering adapting the design for a boiler, to drive a small generator and produce distilled (or at least sanitary) water, though, as I live in hurricane country.
Steve S
Try this wood gas generator.
It's a simple design and it works.
https://www.youtube.com/watch?v=a6e3CprVTi8
It's a simple design and it works.
https://www.youtube.com/watch?v=a6e3CprVTi8
Otto Nobedder wrote:I definitely like the rocket stove design. Quite clever.
If I still lived in a northern climate, I'd have to build one.
I'm considering adapting the design for a boiler, to drive a small generator and produce distilled (or at least sanitary) water, though, as I live in hurricane country.
Steve S
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
I built a really nice rocket stove. Just foolin around one day so no pics but my best friend came over and fell in love with it so now it lives at his campsite. Its fun to take the time to buils something for yourself, even if you never do use it.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Good stuff! I've seen them before; They were common in WWII, especially in Europe, due to gas rationing. Many cars and trucks were converted.WerkSpace wrote:Try this wood gas generator.
It's a simple design and it works.
https://www.youtube.com/watch?v=a6e3CprVTi8
I'd never seen a good explanation or examples of the inner workings before.
While I'd been looking at steam for the distilled water benefit, this looks like it may be efficient enough, and I could get the additional gas cooling he mentions by using waste heat to run a small distillation unit for drinking/cooking water. If I could operate it with sticks in the same manner as the rocket stove, it would be perfect, as I live in the woods and the fuel would be free in an emergency (and already on the ground, after a hurricane!)
You've got me thinking, now.
Steve S
You should take advantage of the online FEMA resources.
http://soilandhealth.org/wp-content/upl ... oodgas.pdf
http://www.nrel.gov/docs/legosti/old/3022.pdf
http://soilandhealth.org/wp-content/upl ... oodgas.pdf
http://www.nrel.gov/docs/legosti/old/3022.pdf
Otto Nobedder wrote:Good stuff! I've seen them before; They were common in WWII, especially in Europe, due to gas rationing. Many cars and trucks were converted.WerkSpace wrote:Try this wood gas generator.
It's a simple design and it works.
https://www.youtube.com/watch?v=a6e3CprVTi8
I'd never seen a good explanation or examples of the inner workings before.
While I'd been looking at steam for the distilled water benefit, this looks like it may be efficient enough, and I could get the additional gas cooling he mentions by using waste heat to run a small distillation unit for drinking/cooking water. If I could operate it with sticks in the same manner as the rocket stove, it would be perfect, as I live in the woods and the fuel would be free in an emergency (and already on the ground, after a hurricane!)
You've got me thinking, now.
Steve S
Perhaps redundant, but please do check out the 'Toxic hazrds' section in the docs above when building and using a wood-gas generator.
Under various conditions they can be lethal and should really only be operated outside in a very well ventilated area as the risk of CO (carbonmonxide) poisoning is very real on these and should not be under-estimated.
Bye, Arno.
Under various conditions they can be lethal and should really only be operated outside in a very well ventilated area as the risk of CO (carbonmonxide) poisoning is very real on these and should not be under-estimated.
Bye, Arno.
I agree...
The same thing is true for a petroleum based engine.
Many people have been killed from exhaust fumes.
Gasoline fumes are harmful, even without combustion.
The same thing is true for a petroleum based engine.
Many people have been killed from exhaust fumes.
Gasoline fumes are harmful, even without combustion.
Arno wrote:Perhaps redundant, but please do check out the 'Toxic hazrds' section in the docs above when building and using a wood-gas generator. Under various conditions they can be lethal and should really only be operated outside in a very well ventilated area as the risk of CO (carbonmonxide) poisoning is very real on these and should not be under-estimated.
Bye, Arno.
Return to “Welding Forum General Shop Talk”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities