General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
Key chain based on old Jody Collier weld interview story
Post Reply
User avatar
  • Posts:
  • Joined:
    Sun May 01, 2016 7:46 am
  • Location:
    Fort Myers Florida

The stick in the joint starts at about $30.00 per hour, the TIG on the top starts about $45.00 an hour
The stick in the joint starts at about $30.00 per hour, the TIG on the top starts about $45.00 an hour
IMG_3040.JPG (134.28 KiB) Viewed 656 times
The mess on the back side you can have for under $25.00 per hour.
The mess on the back side you can have for under $25.00 per hour.
IMG_3041.JPG (122.84 KiB) Viewed 656 times
AWS D1.1 / ASME IX / CWB / API / EWI / RWMA / BSEE
Scientists have substituted mathematics for experiments, and they wander off through equation after equation, and eventually build a structure which has no relation to reality." Nikola Tesla
Top
User avatar

Nice! That's one of my favorite videos of Jody's. If any of y'all haven't seen it, here's a link:

https://www.youtube.com/watch?v=ojFZ__4t7ck
Miller Bobcat 225
Tweco Fabricator 211i
AHP AlphaTIG 200x
Lincoln SP-135+
Hypertherm Powermax 30 Air
ProStar O/A torch
Top
mike078
  • Posts:
  • Joined:
    Mon Sep 26, 2016 2:59 am

DLewis0289 wrote:
IMG_3040.JPG
Best Personalized Trolley Coin KeyRing
IMG_3041.JPG

Hello DLewis0289,
I didn't get what you weld, Will you please explain ?
Both the pictures seems same!!
Top
User avatar

mike078 wrote:
DLewis0289 wrote:
IMG_3040.JPG
Best Personalized Trolley Coin KeyRing
IMG_3041.JPG

Hello DLewis0289,
I didn't get what you weld, Will you please explain ?
Both the pictures seems same!!
If you watch Jody's video he tells the joke...in the second pic the crappy looking weld is worth less then the good looking weld in the first pic.

Haven't seen DLewis around lately, not trying to speak for him but watching the video should answer your question
Richard
Website
Top
Post Reply

Return to “Welding Forum General Shop Talk”