Welcome to the forum!
Posted: Tue Jan 22, 2013 2:10 pm
**EDIT: As of 12/27/2013 all first posts will require approval. This is for security/anti-spam purposes. Once your first post is promptly approved, this restriction will be lifted for the rest of your membership**
Welcome to our online community!
The purpose of this forum is to provide a space for discussion about welding, metal fabrication and other related topics. You will find the members of this forum to be very helpful and constructive - even the pros here understand and remember that everyone was a beginner at some point. You'll also find the members of this forum to be very knowledgable about a number of topics. If you can't find a thread on the topic you're looking for - start a new one! Don't be shy - you can jump right in with your own thoughts and experiences. We're always looking for a new approach or trick that helps us get the job done!
Please review the general rules and guidelines for official standards of conduct, or just use good common sense and be respectful to others. You can also post comments, feedback and suggestions that we welcome!!! Please let us know if there is anything that would improve the community.
Don't forget to tell your friends about this great welding resource - with direct links and access to weldingtipsandtricks.com and a complete library of how-to weld videos!!!
Thanks,
Weldingtipsandtricks.com
Welcome to our online community!
The purpose of this forum is to provide a space for discussion about welding, metal fabrication and other related topics. You will find the members of this forum to be very helpful and constructive - even the pros here understand and remember that everyone was a beginner at some point. You'll also find the members of this forum to be very knowledgable about a number of topics. If you can't find a thread on the topic you're looking for - start a new one! Don't be shy - you can jump right in with your own thoughts and experiences. We're always looking for a new approach or trick that helps us get the job done!
Please review the general rules and guidelines for official standards of conduct, or just use good common sense and be respectful to others. You can also post comments, feedback and suggestions that we welcome!!! Please let us know if there is anything that would improve the community.
Don't forget to tell your friends about this great welding resource - with direct links and access to weldingtipsandtricks.com and a complete library of how-to weld videos!!!
Thanks,
Weldingtipsandtricks.com