Page 1 of 1
Finally Done! Aluminum intake project
Posted: Wed Mar 02, 2016 8:09 am
by admin
Re: Finally Done! Aluminum intake project
Posted: Wed Mar 02, 2016 9:33 pm
by kcmo
this going on your stuff?
Re: Finally Done! Aluminum intake project
Posted: Thu Mar 03, 2016 12:20 pm
by Otto Nobedder
This almost certainly for a customer. When Jody posts a personal project, it's almost always a shop tool, table, or cart project for his own shop needs.
Steve S
Re: Finally Done! Aluminum intake project
Posted: Thu Mar 03, 2016 12:56 pm
by admin
Steve is correct. This is a favor for a local guy with a 280z project car.
Sent from my iPhone using Tapatalk
Re: Finally Done! Aluminum intake project
Posted: Fri Mar 04, 2016 10:23 am
by GFab70
Great video series. I liked the way you put a dab of weld on the plate first then used the dam between the tubes.
I have subscribed and really like your channel because it's real world.
Sent from my SM-N910R4 using Tapatalk