[Marlowr295]

I have a question, recently someone very close to me stole my welder which I saved up a very long time to get. I work at a shop and have a shop welder but I am looking for one to get at home. The only problem is I'm looking for a tig welder with ac/dc capability that I can also plug into my kitchen outlet. So a 120v or a 240v with a converter. Also would like to be able to hook up a foot pedal too I'm not a fan of scratch start. But I have one more problem. I'm getting married next year and me and my fiancé have to put money away and we also have a 4 year old and a 7 year old who drain us of money as well so I'm on a pretty tight budget and I'm at a loss because I have an opportunity to get side work but I can't take it and i don't know what kind of welder I can get. I can't find one on Craigslist or let go or anywhere else so I have to buy new. If you could help direct me in the right direction in which kind of welding machine I should go for that isn't too much money. it would be greatly appreciated. Thank you



Sent from my iPhone using Tapatalk

[cj737]

New, a Lincoln SquareWave 200 is about $1400. You might find a used SW175, but not likely.
HTP/Alpha makes a decent little box, as does Everlast. I suspect both would be 120/240 and are inverter-based. A quality extension cord with an adapter to plug into your dryer outlet might work for your situation.

The AC side of the TIG equation is what jacks the price up. There's heaps of good, small DC only TIG boxes out there. Many though do not include HF start

[AndersK]

The Thermal Arc/Esab Fabricator 186 is a good choice too. About 1700 for a complete package includes pedal.

https://www.weldersupply.com/P/776/Ther ... icator186A

[MinnesotaDave]

Personal opinion - Person who stole it is close to you - get it back, or get paid, or have them arrested and get it back.

Again, very person opinion, if the side work will pay for the machine no problem within 6 months or so, just buy whatever you want.

If the side work is just a few $20 bills here and there, then the machine is just for hobby use and won't make you any money.

Since you want to plug it into kitchen outlets, I'm broadly guessing it may be just for hobby use?
Where will you be doing the cutting and grinding?
What type of side work are you being offered? That can affect your machine choice.

[ldbtx]

I'm with Dave -- have a little conversation with the weasel who stole your welder and get their abject apology and your welder back.

Second choice for around a grand, maybe less, you can get an AHP AlphaTIG 200x. AC/DC TIG plus stick. I paid just shy of $900 for mine, then dropped another $150 or so on an SSC pedal. The supplied pedal and I just didn't get along. YMMV.

Larry

[John Chamorro]

I have a complete SW 175 coming for sale PDQ. It isn't a 120v machine. Where are you located?

[79jasper]

Some companies will finance. That may or may not help.

Sent from my SM-G892A using Tapatalk