Welding Tips and Tricks

I recently purchased a lightly used Millermatic 130XP. Unfortunately it has the discontinued 10A gun and parts to run .023 wire are no longer available. Machine is set up for .30 wire and I want to use .023 for sheet metal replacement on my 67 camaro. Please let me know if you have a M-10 or M-12 gun that you can spare. Hopefully it will have liner and set up for.023 wire.
Thanks, Ed

I would head over to HTP America and get one of their flex neck guns that fits your welder https://usaweld.com/collections/Miller_ ... P_HTP_Flex

If you just want parts, check here https://usaweld.com/collections/Miller_ ... _130XP_OEM

Louie,
Thanks for your suggestion. I will look into the HTP gun and accessories.
Ed