Lincoln HF TIG Box
Posted: Sat May 07, 2016 12:13 pm
Shop full of Syncrowaves and the little Aluminum I do in the field I handle with the Spoolmatic and Trailblazer. Before I EBay this though I would see if any of you guys need one. The cable with it works with Lincoln Ranger but the pin out can be changed for Miller.
If you are going to use it with a Miller like a Trailblazer make sure you have AC like a 302, wouldn't make sense if you don't because you already have lift arc on most of the Trailblazer for Steel/SS. (No AC, No aluminum).
I have used it twice and it works fantastic. I will leave it up here for a week before I post it...
$1000.00 / You pay shipping from Florida.
If you are going to use it with a Miller like a Trailblazer make sure you have AC like a 302, wouldn't make sense if you don't because you already have lift arc on most of the Trailblazer for Steel/SS. (No AC, No aluminum).
I have used it twice and it works fantastic. I will leave it up here for a week before I post it...
$1000.00 / You pay shipping from Florida.
- IMG_3042.JPG (62.3 KiB) Viewed 1046 times
- IMG_3043.JPG (81.85 KiB) Viewed 1046 times
- IMG_3044.JPG (42.5 KiB) Viewed 1046 times