Does anyone use a flapper disc for sharping tungsten? if so, what grit would you recommend? I noticed Jody mentioned using one in his video, but was curious about his thoughts vs spending 350 on a sharpie grinder?
Last edited by jayaz on Thu Sep 05, 2019 8:59 am, edited 1 time in total.
best cheap one i've come across is a electric knife sharpener that has a diamond wheel.
this sort of thing https://ozito.com.au/products/multi-function-sharpener/
this sort of thing https://ozito.com.au/products/multi-function-sharpener/
tweak it until it breaks
- Radishfever
-
Guide
-
Posts:
-
Joined:Wed Aug 21, 2019 5:43 pm
-
Location:Cape Cod, MA
This is what I got from Amazon.
https://www.amazon.com/gp/product/B00CP ... UTF8&psc=1
Can't remember where I got the idea but it was from a welder.
https://www.amazon.com/gp/product/B00CP ... UTF8&psc=1
Can't remember where I got the idea but it was from a welder.
- Attachments
-
- Grinder.jpg (41.14 KiB) Viewed 876 times
-
- Grinder-2.jpg (37.34 KiB) Viewed 876 times
-
- Grinder-3.jpg (35.78 KiB) Viewed 876 times
Learning is the best part of life and the most painful
