Hello to Welding Tips and Tricks forum members!
I am a hobbyist/ metal artist in his 20's. I have quite a bit of Stick and MIG experience and have been trained in a high school welding class on those two processes and started out with a 180 amp MIG welder in my home garage. I also played around with TIG welding while I was in that class too.
I recently splurged and bought a Miller Dynasty 200 DX and while searching the internet for TIG welding instructions, I stumped upon Jody's website and from there, found this forum.
I do some maintenance work at the Grain Elevator I work at and I do quite a bit of metal art mostly for my own pleasure. All we have is an old stick welder at work, so that is what I use there but use all processes at home.
Welcome, Drew. I too do a bit of metal art and would enjoy seeing some pics of your work.
Cheers.
-Eldon
Cheers.
-Eldon
We are not lawyers nor physicians, but welders do it in all positions!
Miller Dynasty 280DX
Lincoln 210 MP
Miller 625 X-Treme
Hobart Handler 150
Victor Oxygen-acetylene torch
Miller/Lincoln Big 40-SA200 hybrid
Miller Dynasty 280DX
Lincoln 210 MP
Miller 625 X-Treme
Hobart Handler 150
Victor Oxygen-acetylene torch
Miller/Lincoln Big 40-SA200 hybrid
Attached are some pictures. Also, I built this when I was back in high school: https://www.youtube.com/watch?v=1xG8BIUQZZ8 It really was my first welding project.
- Attachments
-
- Photo0496.jpg (69.02 KiB) Viewed 491 times
-
- Photo0568.jpg (26.67 KiB) Viewed 491 times
-
- Photo0244.jpg (43.98 KiB) Viewed 491 times
-
- Photo0100.jpg (63.36 KiB) Viewed 491 times
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
Love the fish.