caseyjaybenson
- caseyjaybenson
-
New Member
-
Posts:
-
Joined:Thu May 26, 2016 7:56 pm
Hello guys, I am new at Aluminum welding and I have tons of questions to ask to be patient with me:). If anyone in East Texas will give one on one instruction please let me know.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Welcome, Casey,
Between Jody's excellent videos and the experience here, we can help you through almost anything.
If you're serious about some one-on-one time, you're going to have to be more specific about your location. Nobody needs a street address at this point, of course, but knowing what town you're in or near will improve your odds...
Steve S
Between Jody's excellent videos and the experience here, we can help you through almost anything.
If you're serious about some one-on-one time, you're going to have to be more specific about your location. Nobody needs a street address at this point, of course, but knowing what town you're in or near will improve your odds...
Steve S
caseyjaybenson
- caseyjaybenson
-
New Member
-
Posts:
-
Joined:Thu May 26, 2016 7:56 pm
I live in Tyler, TX. I travel to Dallas TX all the time so anywhere around there is great. I am welding 1/8 inch aluminum square tubing and just cant seem to get stuff to look like Jodys videos:) If anyone is willing to teach Im paying:)
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
I know some folk in your neighborhood. I can't make any promises.
Steve S
Steve S