I have been welding in one form or another for about 20 years now.... First as a jeweler on the micro side of things, and now as a machinist doing build ups and making fixtures. Thrown in the middle was general welding, fixing broken stuff, all the stuff that gets thrown in your lap when you admit to knowing the basics of welding.
Thanks mainly to the You Tube videos by Welding tips and Tricks I decided to embark on scratch start tig. Ouch! Steep learning curve, but very satisfying. I have even made some welds I am proud of. Perhaps I will show and tell in the future.
MotoEngineering
- MotoEngineering
-
New Member
-
Posts:
-
Joined:Tue Mar 15, 2016 4:25 pm
-
Location:Dublin, Ireland
Hi your very welcome and I look forward to any questions you might have regarding TIG welding. Best regards Bert
meralan
welcome
don't be afraid to post your welds. sometimes
more can be learned by the not so perfect welds
then the porn welds.
craig
welcome
don't be afraid to post your welds. sometimes
more can be learned by the not so perfect welds
then the porn welds.
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil