Page 1 of 1
Introduction
Posted: Mon Jan 07, 2019 3:39 pm
by btolrud
Hi, not much to say, I am a retired electrical engineer, having fun restoring a 1979 Blazer. I've welded in the past but only stick. So, now I am learning MIG and TIG. So far I've got pretty good with MIG, but TIG I'm having a little trouble with coordination. Guess that comes with age.
Re: Introduction
Posted: Tue Jan 08, 2019 7:39 am
by tungstendipper
Welcome!
Re: Introduction
Posted: Thu Jan 10, 2019 12:45 am
by Mr_Joshua
Welcome! I too, am new. I'm currently having an intense love affair with aluminum, and a CK 17f torch.
Re: Introduction
Posted: Thu Jan 10, 2019 11:06 am
by LanceR
Hello and welcome from Stokes County, North Carolina.
Re: Introduction
Posted: Thu Jan 10, 2019 11:42 am
by cheaton
Hello my name is Chris aka SlyFox. Currently mig weld steel and aluminum. Been watching Weldingtipsantricks learnt a
great deal. I build race cars frames roll cages and such with mild steel. Wanting to try my hand at Tig welding. And came
to forum to learn and ask questions. Thank you Have A Great Day.
Re: Introduction
Posted: Thu Jan 10, 2019 12:06 pm
by cheaton
Hello my name is Chris aka SlyFox. Currently mig weld steel and aluminum. Been watching Weldingtipsantricks learnt a
great deal. I build race cars frames roll cages and such with mild steel. Wanting to try my hand at Tig welding. And came
to forum to learn and ask questions. Thank you Have A Great Day.
Re: Introduction
Posted: Mon Jan 21, 2019 11:35 am
by Rrise
Hello everyone, I'm new here. I started welding recently as a hobby, but now I think that this may be my new profession. I never would have thought that from a writer I would turn into a welder.