My name is William Payne, I live in New Zealand. This is a welding site so I’ll try and stay on topic. I am 32 years old. I started working in a machine shop that does job shop and mould tool and die work back in 2011. I was an inexperienced newbie and was in the trade because At the time it was the only job I could get. First day on the job I was basically handed a TIG torch and it was the only thing I was ever naturally good at. Besides a 2 year stint in an unrelated industry I still work at that machine shop and while I do more machining than welding in my day job I really love to weld. I have been setting up a home based shop behind my house and that is finally at a point where I will soon be able to take on work at home.
At home I have a Miller Syncrowave 350LX with a Coolmate 3, that is my main machine. My smaller welders are a ESAB Power Compact 205 Mig and a little BOC Gases 185 amp DC inverter TIG.
William Payne
- William Payne
-
Workhorse
-
Posts:
-
Joined:Sun Jan 17, 2021 6:15 am
-
Location:New Zealand
Last edited by William Payne on Fri Jan 22, 2021 3:55 pm, edited 1 time in total.
Miller Syncrowave 350LX
Esab Power Compact 205
BOC 185DC Tig
Esab Power Compact 205
BOC 185DC Tig
William Payne
- William Payne
-
Workhorse
-
Posts:
-
Joined:Sun Jan 17, 2021 6:15 am
-
Location:New Zealand
Been moving some stuff and had some wiring done. But here is my Syncrowave. Just waiting to be hooked up properly in its permanent spot as I get things more setup.
- Attachments
-
- 5DC678BA-F9FA-4E70-840E-B927645A50C2.jpeg (70.4 KiB) Viewed 1209 times
Miller Syncrowave 350LX
Esab Power Compact 205
BOC 185DC Tig
Esab Power Compact 205
BOC 185DC Tig
