Howdy from Europe.
Posted: Sat Mar 11, 2023 12:29 pm
Howdy guys, been following Jody's work for nearly a decade now and probably learned more from him than i ever did during school.
Joined these forums because there's always more learning to do in this field and i'm up for it.
I work as an instructor and technique developer for one of the largest sheet metal fabrication companies in the world (definitely the largest in Europe) and do quite a bit of welding there myself as well and hopefully can be of help to someone here.
Materials i usually work with are Stainless Steel, Aluminium and Titanium, thicknesses usually range between 0,5mm-1,6mm.
Take me on board
-Tarvo.
Joined these forums because there's always more learning to do in this field and i'm up for it.
I work as an instructor and technique developer for one of the largest sheet metal fabrication companies in the world (definitely the largest in Europe) and do quite a bit of welding there myself as well and hopefully can be of help to someone here.
Materials i usually work with are Stainless Steel, Aluminium and Titanium, thicknesses usually range between 0,5mm-1,6mm.
Take me on board
-Tarvo.