I come from a land downunder (Hi)
Posted: Thu Mar 28, 2013 12:42 am
Pardon the pun
I am getting into welding as more of a hobby, and to eventually create my own fabrications for 4x4 etc....
I have done a little mig (gassless) and stick welding, had to replace the floor in my trailer and fabricated a above ground pool roller, this was done with Cigweld 130 Turbo (Gassless) and Cigweld 130 Inverter stick.
I was shown the basics by a coded industry welder, who does it day in day out and I have done lots of research on forums, web and youtube etc.
I am just starting to get equiped, I have purchased a 200a Mig,Tig and Arc combined unit made in China but to Local specifications using specific components and supplied to industry including the mining companies in Western Australia.
http://www.weldsmart.com.au/welding-aus ... arc-welder
I also have a Nomad welding table on order with accessory kit, due to the fact I need to be able to pack up after completion of work.
Eventually after funds allow I will get a plasma to make life easier.
My aim is to learn all I can from the experience of this forum, and then be able to share with others.
Cressida
I am getting into welding as more of a hobby, and to eventually create my own fabrications for 4x4 etc....
I have done a little mig (gassless) and stick welding, had to replace the floor in my trailer and fabricated a above ground pool roller, this was done with Cigweld 130 Turbo (Gassless) and Cigweld 130 Inverter stick.
I was shown the basics by a coded industry welder, who does it day in day out and I have done lots of research on forums, web and youtube etc.
I am just starting to get equiped, I have purchased a 200a Mig,Tig and Arc combined unit made in China but to Local specifications using specific components and supplied to industry including the mining companies in Western Australia.
http://www.weldsmart.com.au/welding-aus ... arc-welder
I also have a Nomad welding table on order with accessory kit, due to the fact I need to be able to pack up after completion of work.
Eventually after funds allow I will get a plasma to make life easier.
My aim is to learn all I can from the experience of this forum, and then be able to share with others.
Cressida
At least I think that's why...