Hello all,
trying to learn how to tig very thin alum. and S/S
When seconds count, the police are only minutes away...
Lincoln Squarewave 335, water cooled WP20 torch with pedal control
Millermatic 200 mig
Thermodynamics Cutmaster 52 Plasma
Old stick welder
Cutting torch, saws and grinders
Very little talent.
Lincoln Squarewave 335, water cooled WP20 torch with pedal control
Millermatic 200 mig
Thermodynamics Cutmaster 52 Plasma
Old stick welder
Cutting torch, saws and grinders
Very little talent.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Welcome!
It requires good equipment. Not all machines perform well in the 3-8 amp range one needs to weld beer cans together...
How thin are you talking? I've welded .049 tubing in both Al and SS, down to 3/8".
"Pulse" feature is a big plus.
Steve S
It requires good equipment. Not all machines perform well in the 3-8 amp range one needs to weld beer cans together...
How thin are you talking? I've welded .049 tubing in both Al and SS, down to 3/8".
"Pulse" feature is a big plus.
Steve S
thanks Steve,
i have played with the pulse some, and will work with it more, but i seem to do better without it.
thank for the info.
Richard
i have played with the pulse some, and will work with it more, but i seem to do better without it.
thank for the info.
Richard
When seconds count, the police are only minutes away...
Lincoln Squarewave 335, water cooled WP20 torch with pedal control
Millermatic 200 mig
Thermodynamics Cutmaster 52 Plasma
Old stick welder
Cutting torch, saws and grinders
Very little talent.
Lincoln Squarewave 335, water cooled WP20 torch with pedal control
Millermatic 200 mig
Thermodynamics Cutmaster 52 Plasma
Old stick welder
Cutting torch, saws and grinders
Very little talent.