Page 1 of 1
Older Miller Dynasty 200 DX
Posted: Wed Oct 16, 2013 12:38 am
by SteveJ
I bought an older Miller Dynasty 200 DX...... manufactured in 2005 and it doesn't have a variety of waveform available! It only has "Advanced Squarewave". My question is how much does a person need the other waveform's the newer ones have??
I upgraded from a Diversion 180 which also has the "Advanced Squarewave"!
Just curious????
Re: Older Miller Dynasty 200 DX
Posted: Wed Oct 16, 2013 9:22 am
by Mike
I cant answer your question.
But noticed this is your first post, so I will welcome you to the forum, Steve.
Re: Older Miller Dynasty 200 DX
Posted: Thu Oct 17, 2013 1:16 am
by SteveJ
Thank You! I don't post too much I'm just a reader! I just thought I would put the question out there and see what others thought!
Re: Older Miller Dynasty 200 DX
Posted: Thu Oct 17, 2013 6:24 am
by weldin mike 27
Hey mate,
Im sure that someone will trump me, by i think that all those features are just "nice" things to have, but you can get by just fine without them. (Probably too confusing for a starter) One of our members lays the sweetest Al beads you ever saw with a welder that noah had on the arc. Go figure.
Mick
Re: Older Miller Dynasty 200 DX
Posted: Mon Oct 21, 2013 3:30 pm
by SteveJ
Some people are just born to be a great welder then there's me ..... Practice.. Practice ... Practice!! Thanks for the REPLY!!
Re: Older Miller Dynasty 200 DX
Posted: Tue Oct 22, 2013 5:44 am
by weldin mike 27
Same here mate, if i dont watch every mm of every bead i do, it turns to crap.
Mick