New Welder

Mizzip · Sun Feb 09, 2014 10:19 pm

I have just begun a welding class and would like some feedback on the quality of some of my first welds. I was welding with a 6013 electrode on some kind of steel ( not stainless).

: 026.jpg (37.43 KiB) Viewed 805 times

: 025.jpg (50.97 KiB) Viewed 805 times

Superiorwelding · Mon Feb 10, 2014 12:30 am

Mizzip,
First welcome to the Forum. Your welds are looking good. I am surprised that your instructor is not having you whip the 6013. Not that you should/shouldn't. The welds themselves look reasonably uniform as far as how smooth they are. Honestly this is better work than I have seen out of some beginners. Keep up the good work and keep the questions and pictures coming.

Superiorwelding · Mon Feb 10, 2014 12:38 am

Superiorwelding wrote:Mizzip,
I am surprised that your instructor is not having you whip the 6013. Not that you should/shouldn't. .

Just thought I would clarify that I don't recommend whipping 6013, just I have seen so many whip this rod, including limited instructors.

Mike · Mon Feb 10, 2014 1:42 pm

Welcome to the forum Mizzip.
Not bad for your first try.

AKweldshop · Mon Feb 10, 2014 1:44 pm

Welcome to the forum.
you should congratulate yourself on those welds, are those your first welds?

~John

Mizzip · Mon Feb 10, 2014 2:44 pm

AKweldshop wrote:Welcome to the forum.
you should congratulate yourself on those welds, are those your first welds?

~John

They are from the first time i ever welded. The welds in the picture are within the first 30 beads i ran during my first time.

AKweldshop · Mon Feb 10, 2014 2:54 pm

I'm sure you've had some though-the-helmet watching time.

Right?
~John

Mizzip · Mon Feb 10, 2014 3:07 pm

AKweldshop wrote:I'm sure you've had some though-the-helmet watching time.
Right?
~John

To be honest with you I knew absolutely nothing about welding when i first came in, We were putting on our gear and prepping for the assignment and I was like "So what do i do?". I got paired up with one of the more experienced guys in the class and he ran me through it for about 20 minutes (How the machine works, how to strike an arc, what can get me hurt etc.) and i watched him for about 5 minutes. Then I started on my own and thats what you see above. I feel like they are average quality, Im just curious as to how i stack up against other begginers and if i have potential or not.

AKweldshop · Mon Feb 10, 2014 4:52 pm

Here's a some good videos on stick.
http://welding-tv.com/2012/04/05/stick- ... rom-bubba/
http://welding-tv.com/2012/10/24/boy-sc ... k-welding/
http://welding-tv.com/2012/10/10/stick- ... -buzz-box/

I would highly recommend watching these three(3) videos, they will help you tremendously!!!

~John

Mizzip · Fri Apr 11, 2014 10:56 pm

So its been a minute since ive posted my beginning welds. Since then Ive gained some experience with MIG and TIG. The reason i signed up for the class was to become familiar with welding related information and gain experience welding. My goal is to one day pass a 6G test. I am wondering whatyou guys think would be a good place to start learning/honing skills to do that. Right now i understand the very basics of Stick (SMAW) welding, I can operate the machine and run an average looking bead. What I want to is to be knowledgeable on the ins and outs of all the things we do, such as how this type of metal reacts to this amperage with this electrode. How different angles effect the weld, what temperatures are ideal for welding different types/shapes of metals. I can do lap and T joints fine, but looking ahead to the 6G is intimidating. Anyways what books/websites should i be reading, What things should i be learning and what should i be practicing to become a better welder and more specifically capable of passing a 6G. I know its far off but I am willing to learn and capable. Thanks for your help.