Page 1 of 1
the new guy
Posted: Mon Mar 24, 2014 9:58 am
by 96-780
just a quick helo, I am an oyster farmer in prince Edward island Canada and I work with a lot of aluminum machines so about 2 years ago I bought a 175 millermatic and use it for small repairs on equipment. the largest project to date is a hydro knuckle boom which turned out well for an amature. I have no training and am self taught so I'm looking forward to this form and the contributors. Thanks in advance Kevin
Re: the new guy
Posted: Mon Mar 24, 2014 2:39 pm
by Fat Bob
Welcome Kevin! As the new guy you will need to send a case of oysters to each active member of the site so we will start PMing you our mailing addresses ASAP.
Re: the new guy
Posted: Mon Mar 24, 2014 2:54 pm
by AKweldshop
I'll take a case too.
Welcome to the forum, and never hesitate to post up some pics if you need some pointers....
Welcome!!!
~John
Re: the new guy
Posted: Mon Mar 24, 2014 3:45 pm
by 96-780
thanks guys, I would gladly send the oysters but there is about 40 inches of ice over them .
Re: the new guy
Posted: Mon Mar 24, 2014 10:01 pm
by paul_s
Welcome to the forum.
Re: the new guy
Posted: Mon Mar 24, 2014 10:05 pm
by Otto Nobedder
96-780 wrote:thanks guys, I would gladly send the oysters but there is about 40 inches of ice over them .
So, they're already packed for shipping...
Welcome to the asylum!
Steve S
Re: the new guy
Posted: Mon Mar 24, 2014 11:24 pm
by 96-780
thanks so much for the warm welcome.
Re: the new guy
Posted: Mon Mar 24, 2014 11:36 pm
by AKweldshop
Great to have you, If you need some help, just ask...
~John
Re: the new guy
Posted: Fri Mar 28, 2014 10:38 am
by Mike
Welcome to the forum Kevin.