Page 1 of 1
Hello from the Duke City
Posted: Sat Sep 20, 2014 10:49 pm
by T411
From Albuquerque NM
Retired USAF machinist/welder
Equipment:
2 SB lathes
Clausing mill
Rockwell mill
3 pantographs
Rockwell drill press
disk/belt sander
Rockwell band saw
I have no welders
and I want to build metal furniture so I'm not quite there yet. I want a TIG and a MIG welder.
Nothing to do with welding but I also want to build pool cues.
Re: Hello from the Duke City
Posted: Sun Sep 21, 2014 6:28 am
by Braehill
T411,
First off thanks for your service and welcome to the forum. I'm sure before long you'll be contributing as well as learning from the wide knowledge base we're accumulating here. We have folks on here that are as new as a baby to people with 40+ years of experience. You could probably ask a question here on any subject you could dream up and find a well researched answer. We want to know the answer as much as the person asking and are willing to go out of our way to find it if we don't already know. That's the true greatness of this forum.
I wish I had a few of the items you've listed and more than that, I wish I had the room for them.
Len
Re: Hello from the Duke City
Posted: Sun Sep 21, 2014 7:56 am
by motox
welcome
nice collections of shop equipment.
add a welder and your on your way
to a metal furniture business
craig
Re: Hello from the Duke City
Posted: Sun Sep 21, 2014 11:07 am
by T411
Thank you for the welcome... Appreciated. Yes this forum looks to be a wealth of info.
Tomero
Re: Hello from the Duke City
Posted: Sun Sep 21, 2014 3:31 pm
by Mike
Welcome to the forum.