Welding Tips and Tricks

I did a frame off on a 1969 F100 modified/added IFS and four link plus boxed the frame. All with a 15 year old borrowed Miller and a Victor cutting torch. I now have moved and am confined to a three car garage with one bay for the truck. So I have saved up and am ready to outfit my metal station. I want to learn TIG after making my own headers for the truck it became apparent Mig was not good enough. I am looking at a MP welder for Mig and Tig, I never stick weld, to conserve space. Also considering adding a plasma cutter to the stable instead of a torch setup.

These will be my first Units, Trying to have the most capability in the smallest package

MP Units: Lincoln Power Mig 210MP or ESAB Rebelboth with TIg and foot pedal.

Plasma Cutter: Miller 375 Extreme

So any guidance would help I would rather spend a little more now and have my equipment last longer.

Look at getting an SSC pedal and CK TIG torch, probably better at less cost

Sent from mobile. Not responsible for Typos

Welcome to the forum.