Hey guys I was wondering if there are any laser operators or owner here? I am having some issues cutting 1/2" holes in 1/2" plate without welding it on the back.
Thanks,
Jason
Jason_alex
- Jason_alex
-
Guide
-
Posts:
-
Joined:Fri Jan 24, 2014 1:41 pm
Okay I got it figured out with the peck function. Has anyone had luck power piercing through 1/2"? How long dose it take you to pierce 1/2"?
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
I'm fairly sure there are one or two other members with laser experience, but it may take a bit to see a reply, as a good bit of our membership visits weekly or less.
Bump the topic every now and then, and someone will surely comment.
Steve S
Bump the topic every now and then, and someone will surely comment.
Steve S
Jason_alex
- Jason_alex
-
Guide
-
Posts:
-
Joined:Fri Jan 24, 2014 1:41 pm
Will do thanks, I got my 1/8" hole looking great going though 1/2" plate.
- Attachments
-
- 20150212_132834.jpg (34.48 KiB) Viewed 701 times