Metal cutting - oxyfuel cutting, plasma cutting, machining, grinding, and other preparatory work.
Kustom Plasma Kuts
- Kustom Plasma Kuts
-
New Member
-
Posts:
-
Joined:Thu Feb 19, 2015 3:22 pm
-
Location:Watson, La
New to the site. Just wanted to post a couple of pics of my jambalaya stand we done a while back
- Attachments
-
- jeffs i phone 178.JPG (82.26 KiB) Viewed 2057 times
-
- jeffs i phone 183.JPG (92.37 KiB) Viewed 2057 times
- Braehill
-
Weldmonger
-
Posts:
-
Joined:Sat Jul 06, 2013 11:16 am
-
Location:Near Pittsburgh,Pennsylvania. Steel Buckle of the Rust Belt
Jeff,
Welcome to the forum.
That's nice work, only problem is now you're going to have a bunch of derilict welders (Steve) from La. coming to your place for food.
We have a few other custom metal melters on here as well that you can swap stories with.
Len
Welcome to the forum.
That's nice work, only problem is now you're going to have a bunch of derilict welders (Steve) from La. coming to your place for food.
We have a few other custom metal melters on here as well that you can swap stories with.
Len
Now go melt something.
Instagram @lenny_gforce
Len
Instagram @lenny_gforce
Len
Kustom Plasma Kuts
- Kustom Plasma Kuts
-
New Member
-
Posts:
-
Joined:Thu Feb 19, 2015 3:22 pm
-
Location:Watson, La
Artie F. Emm
- Artie F. Emm
-
Weldmonger
-
Posts:
-
Joined:Thu Jul 24, 2014 7:53 am
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
RookieWelder
- RookieWelder
-
New Member
-
Posts:
-
Joined:Tue Oct 14, 2014 8:33 am
-
Location:Raleigh, NC
Ohhhhhhh -- Taylor Ham, Egg and Cheese on a hard roll is one of the few things I miss about New Jersey. But, I don't miss it enough to live there again. Winters there are just too rough.motox wrote:nice set up but what the heck is jambalaya.
we have pork roll, egg and cheese here in NJ.
craig
Dwight
Nice stand, looks like a good time, and welcome!!
Re: winter. 5f is a heat wave as of late. We've only seen a positive number once in the last two weeks. -7 right now. This years been rough, and moving south looks better all the time.
Re: winter. 5f is a heat wave as of late. We've only seen a positive number once in the last two weeks. -7 right now. This years been rough, and moving south looks better all the time.
- Braehill
-
Weldmonger
-
Posts:
-
Joined:Sat Jul 06, 2013 11:16 am
-
Location:Near Pittsburgh,Pennsylvania. Steel Buckle of the Rust Belt
It went up 26* here yesterday and still only made it to 11*, damn that's cold. Snowing here since 6am and expecting 5-8".
You're right, south is looking way better.
Len
You're right, south is looking way better.
Len
Now go melt something.
Instagram @lenny_gforce
Len
Instagram @lenny_gforce
Len
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Jambalya is easy...
Start with rice.
Jamb in all your leftovers, and lya 'bout what's in it...
Start with rice.
Jamb in all your leftovers, and lya 'bout what's in it...
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
What about a chicken parmigiana? Crumbed chicken breast covered with a ham cheese and crushed tomatoes and baked until melted. Probably best drinking food ever made.
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
- TRACKRANGER
-
Weldmonger
-
Posts:
-
Joined:Wed Aug 06, 2014 12:48 am
-
Location:Melbourne, Australia
A bit late to reply, but the word "Jambalaya" I remember from the Carpenters song "On The Bayou".
I worked in Mississippi for a while a few years back. It was not uncommon to hear that term then.
I reckon real good Jambalaya would be pretty tasty
8-ZM79L8TDc
I worked in Mississippi for a while a few years back. It was not uncommon to hear that term then.
I reckon real good Jambalaya would be pretty tasty
8-ZM79L8TDc
EWM Phonenix 355 Pulse MIG set mainly for Aluminum, CIGWeld 300Amp AC/DC TIG, TRANSMIG S3C 300 Amp MIG, etc, etc
- TRACKRANGER
-
Weldmonger
-
Posts:
-
Joined:Wed Aug 06, 2014 12:48 am
-
Location:Melbourne, Australia
'Cause I got a bit carried away with Jambalaya, I found this (courtesy http://quezi.com/8645)
What is jambalaya?
Jambalaya is an easy-to-cook one-pot dish well suited to feeding a gathering. The basis of Cajun Jambalaya is meat—chicken, sausage or whatever is available. This is browned, then vegetables are added—onions, celery and green bell pepper (also known as capsicum). When this trinity of vegetables is softened, seasoning and stock is added and the whole lot is left to slowly simmer for an hour or more. It’s then brought to the boil and rice is added, being left to absorb moisture and flavor from the stock.
Could be yummy...
What is jambalaya?
Jambalaya is an easy-to-cook one-pot dish well suited to feeding a gathering. The basis of Cajun Jambalaya is meat—chicken, sausage or whatever is available. This is browned, then vegetables are added—onions, celery and green bell pepper (also known as capsicum). When this trinity of vegetables is softened, seasoning and stock is added and the whole lot is left to slowly simmer for an hour or more. It’s then brought to the boil and rice is added, being left to absorb moisture and flavor from the stock.
Could be yummy...
EWM Phonenix 355 Pulse MIG set mainly for Aluminum, CIGWeld 300Amp AC/DC TIG, TRANSMIG S3C 300 Amp MIG, etc, etc
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
It is.TRACKRANGER wrote:'Cause I got a bit carried away with Jambalaya, I found this (courtesy http://quezi.com/8645)
What is jambalaya?
Jambalaya is an easy-to-cook one-pot dish well suited to feeding a gathering. The basis of Cajun Jambalaya is meat—chicken, sausage or whatever is available. This is browned, then vegetables are added—onions, celery and green bell pepper (also known as capsicum). When this trinity of vegetables is softened, seasoning and stock is added and the whole lot is left to slowly simmer for an hour or more. It’s then brought to the boil and rice is added, being left to absorb moisture and flavor from the stock.
Could be yummy...
In New Orleans, and surrounding areas, you can buy (fresh or frozen) onions, celery, and bell pepper, under the name, "trinity".
Steve S
- RocketSurgeon
-
Guide
-
Posts:
-
Joined:Wed Mar 11, 2015 9:13 am
-
Location:All around Lake Pontchartrain
TRACKRANGER wrote:A bit late to reply, but the word "Jambalaya" I remember from the Carpenters song "On The Bayou".
I worked in Mississippi for a while a few years back. It was not uncommon to hear that term then.
I reckon real good Jambalaya would be pretty tasty
8-ZM79L8TDc
KILL IT! KILL IT WITH FIRE!
Chris
NASA is not the enemy of the American taxpayer.
AWS D1.1, D17.1
NASA is not the enemy of the American taxpayer.
AWS D1.1, D17.1
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities