Metal cutting - oxyfuel cutting, plasma cutting, machining, grinding, and other preparatory work.
New mag drill?
Post Reply
AKmud
  • Posts:
  • Joined:
    Fri Jan 25, 2013 1:47 am
  • Location:
    Wasilla, Alaska

I'm in the market for a mag drill, what's the best bang for the buck these days? Not much of a used market around here so I'll probably end up buying new.
Top
GreinTime
  • Posts:
  • Joined:
    Fri Nov 01, 2013 11:20 am
  • Location:
    Pittsburgh, PA

I'm a fan of the Fein mag drills

Sent from my VS995 using Tapatalk
#oneleggedproblems
-=Sam=-
Top
User avatar
  • Posts:
  • Joined:
    Sat Mar 30, 2013 11:49 am
  • Location:
    Sweden

I ran 50 holes last week with a Milwaukee cordless magdrill. A great machine
Top
User avatar
  • Posts:
  • Joined:
    Sat Nov 29, 2014 6:30 pm
  • Location:
    Farmington, MN

I bought a little EVO MAG 42 a few months ago, and it has worked well for my needs.
Very affordable and dependable!
Image
Top
JimBoSmith
  • Posts:
  • Joined:
    Sun Nov 06, 2016 4:42 pm
  • Location:
    Oregon

I just purchased a evolution as well and I am very happy with what I got for the money. It's substantially less expensive compared to most out there.
Top
Antorcha
  • Posts:
  • Joined:
    Fri Dec 06, 2013 8:57 am
  • Location:
    By da lake

Five year warranty
Top
NHDanO
  • Posts:
  • Joined:
    Mon Aug 03, 2015 7:37 am
  • Location:
    New Haven, NY

I would definitely check out the Evolution line. They make a couple different sizes.
Top
JHenze646
  • Posts:
  • Joined:
    Thu Sep 08, 2016 1:44 pm

What are you using your mag-drill for? Tapping? Countersink? If just for drilling holes, how big, how often and where? Will you be in the shop, on the jobsite, or both?
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

Here's mine:
RB1.JPG
RB1.JPG (106 KiB) Viewed 1821 times
Bought im about 15 year ago when all I could afford was the cheapest chinese POS I could find. I've bashed the POS around for all that time on pipes, plate and beams and never missed a beat. Largest cutter I use is 40mm (1-1/2"). Thickest plate I've cut is 20mm (3/4").
The plastic fluid bottle cracked up pretty quick so made one up from staino, all good.
I love this mag drill and wouldn't change it for an expensive branded one.

You have options.
Flat out like a lizard drinkin'
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

I just checked up on it, it's actually Taiwanese made which explains the good quality.
Here's a link to their website, you can check if they are available in your area:

http://www.agp-powertools.com
Flat out like a lizard drinkin'
Top
AKmud
  • Posts:
  • Joined:
    Fri Jan 25, 2013 1:47 am
  • Location:
    Wasilla, Alaska

JHenze646 wrote:What are you using your mag-drill for? Tapping? Countersink? If just for drilling holes, how big, how often and where? Will you be in the shop, on the jobsite, or both?
I'll mainly use it for drilling. I end up doing quite a bit of fabricating where I can't get the pieces on my press. I'm tired of breaking drill bits while using my hand drill. I borrowed my buddy's Evolution and had a hard time giving it back...
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

was it the Evolution with the 1/2" chuck?
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
AKmud
  • Posts:
  • Joined:
    Fri Jan 25, 2013 1:47 am
  • Location:
    Wasilla, Alaska

motox wrote:was it the Evolution with the 1/2" chuck?
craig
I think he had a 1/2" chuck for it, but we were using annular cutters.
Top
Bobby Sixguns
  • Posts:
  • Joined:
    Mon Jan 05, 2015 9:48 pm

I have a DeWalt magdrill and have been very happy with it. Bought it from the Mac Tools dealer that comes to the shop for just under $800. It has earned it's keep in the couple years I've had it.
Top
Post Reply

Return to “Metal Cutting”