Page 1 of 1
Anyone remember a good plasma cut thread?
Posted: Mon May 10, 2021 4:40 pm
by Jakedaawg
Just like the tittle. Can someone link to a good thread about which plasma to buy?
Criteria:
1. absolutely no China.
2. Hopefully cut and pierce .083 to .250 Al.
3. Preferably name brand. It's for my shop, I dont want a discount offshore thing.
4. It would be nice if could someday be installed in a plasma table.
4. Hopefully my 10hp Saylor Beal compressor is good enough.
Re: Anyone remember a good plasma cut thread?
Posted: Mon May 10, 2021 5:04 pm
by cj737
Thermal Dynamics CutMaster 40
Re: Anyone remember a good plasma cut thread?
Posted: Wed May 12, 2021 12:02 am
by Oscar
TD, Miller, Hypertherm, HTP, they all offer pretty good stuff. Always price out consumables, always.
Re: Anyone remember a good plasma cut thread?
Posted: Sun May 23, 2021 2:03 pm
by Weld ON
Jakedaawg wrote:Just like the tittle. Can someone link to a good thread about which plasma to buy?
Criteria:
1. absolutely no China.
2. Hopefully cut and pierce .083 to .250 Al.
3. Preferably name brand. It's for my shop, I dont want a discount offshore thing.
4. It would be nice if could someday be installed in a plasma table.
4. Hopefully my 10hp Saylor Beal compressor is good enough.
Im last person which can say something is good from china especialy welding machine but be honest i dont like stahlwer because i have one welding machine too ( using as step ) but i have plasma CUT 70 and without problem 20mm plate or 10mm alu , im going to use for my CNC plasma project , for plasma you need about 3-5 Bar and minimum 80L/min i have 250l/min and using about 125l/min for long cutting for sort you will be good with 80L/min. That plasma cost 500eur and only thing what you need to change is main power cable, Is with autopilot and im using for last 2y . When i say is good then is good for sure coz i like stuff like ESAB , Fronius and other world know brands ...
. I have Powermax 65 too but are you sure you going to spend ... have look
https://www.weldersupply.com/C/477/HyperthermPowermax65
https://www.stahlwerk-schweissgeraete.d ... t-zuendung