Inexpensive CNC gantry Kit
Posted: Mon Dec 02, 2013 4:19 pm
Can someone recommend a cheap/affordable Gantry kit w/o electronics for a 2x2 CNC Plasma Cutter?
Page 1 of 1
Re: Inexpensive CNC gantry Kit
Posted: Fri Dec 20, 2013 7:57 pm
torch mate . cnc and cheap usually are not used in the same sentence.
Re: Inexpensive CNC gantry Kit
Posted: Fri Dec 20, 2013 10:33 pm
you will be doing good to get set up for less then $6500 
good luck, John
good luck, John