Help ID Blade (Bandsaw) Welder
Posted: Mon Sep 29, 2014 10:27 am
- Bandsaw Blade Welder
- photo.JPG (39.97 KiB) Viewed 2593 times
Page 1 of 1
Can anyone ID this bandsaw blade welder? I does not have a data plate, brand or manufacturer markings. This has been on my nice to have but not a necessity wish list for a while and I found this one in working condition and talked the shop down to $70 so I could not pass it up.
Re: Help ID Blade (Bandsaw) Welder
Posted: Mon Sep 29, 2014 7:50 pm
I can't help identify it, but that's a great deal on one of those!
Re: Help ID Blade (Bandsaw) Welder
Posted: Tue Sep 30, 2014 11:36 pm
delraydella wrote:I can't help identify it, but that's a great deal on one of those!
Thanks. Yeah I'm pretty excited about this deal. I just found out from another forum that it's a Powermatic 600. I was also able to get the IPB and operating instructions. This model was mounted on the Powermatic model 87 bandsaw even though this particular blade welder has a carrying handle, is in an inclosed case and looks to be a stand alone unit with a plug.
Tomero
Re: Help ID Blade (Bandsaw) Welder
Posted: Wed Oct 01, 2014 9:02 am
Now that you say that, that color definitely looks like Powermatic green. It may have gotten taken out of the bandsaw and someone made a custom cover for it.
I'm jealous! I want one of those.
Other Steve
I'm jealous! I want one of those.
Other Steve
Re: Help ID Blade (Bandsaw) Welder
Posted: Wed Oct 08, 2014 7:37 pm
I just searched Google Images "powermatic bandsaw welder" and thats what comes up $70 great deal
Re: Help ID Blade (Bandsaw) Welder
Posted: Sat Oct 11, 2014 10:04 am
sparkness is right on his I.D. It came out of a 12" Powermatic vertical bandsaw Model 87. The blade welder is a Model 600 and runs on 115 or is 3 phase. There were two different versions of this welder. A manual can be downloaded here for $13.50. http://industrial-library.com/catalog/p ... cts_id/289 Sorry, I couldn't find a "free" one.
Re: Help ID Blade (Bandsaw) Welder
Posted: Sun Oct 12, 2014 2:58 pm
[quote="Fat Bob"]sparkness is right on his I.D. It came out of a 12" Powermatic vertical bandsaw Model 87. The blade welder is a Model 600 and runs on 115 or is 3 phase. There were two different versions of this welder. A manual can be downloaded here for $13.50. http://industrial-library.com/catalog/p ... cts_id/289 Sorry, I couldn't find a "free" one.
I didn't realize that it came in two versions. This one has a 115 plug attached to a fat @$$ cord. I wonder if it can be either 115 or 220? I'm going to have to take a look at the manual. I plan on refurbishing/restoreing it.
Thanks for the info.
I didn't realize that it came in two versions. This one has a 115 plug attached to a fat @$$ cord. I wonder if it can be either 115 or 220? I'm going to have to take a look at the manual. I plan on refurbishing/restoreing it.
Thanks for the info.