It's been a long and rough last couple months for me. I have a background of 14 years in the machine/welding shop for the AF. I never had a problem with the aircraft welding cert. Fast forward to the civilian world. I was never formally trained in mig welding. To be honest alot of what I learned I learned from this forum. As most know I failed my first tests. Overhead and vert 1/2 steel mig welded. Back to the drawing board and lots more reasearch on the internet asking stupid questions doubleing up on my adderal and I made my second attempt. I wasn't worried about the aluminum butt joint 22" long horz. I've always loved welding aluminum. So to formally inform yall I got notice today all my welds passed. I want to take this opportunaty to thank all yall that answered all my questions. You all deserve a cold one cause you helped this guy get through this. So THANK YOU VERY MUCH!
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Congratulations!!!
Don't go spreading that praise too thick, though... In the end it was YOUR welds that passed. Have that cold one, yourself!
Steve S
Don't go spreading that praise too thick, though... In the end it was YOUR welds that passed. Have that cold one, yourself!
Steve S
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
All right, for however this group contributed,
"You're welcome."
But it was still YOUR welds that passed!
Steve S
"You're welcome."
But it was still YOUR welds that passed!
Steve S