Welding Certification test Q&A and tips and tricks
kmcarr1983
- kmcarr1983
-
New Member
-
Posts:
-
Joined:Thu Dec 05, 2013 6:22 pm
Here's my problem I've tried pushing the rod I just can't get it keeps clumping up I have my speed right amperage is nominal I just need a lil help before my test any suggestions would help as we practice on 4" pipe carbon but test is normal stainless carbon weld just need to pass is all
- AKweldshop
-
Weldmonger
-
Posts:
-
Joined:Wed Oct 23, 2013 3:30 pm
-
Location:Palmer AK
http://welding-tv.com/2014/01/21/6g-wel ... weld-test/
http://welding-tv.com/2014/01/28/6g-tes ... -309-tips/
Funny, as Jody just made some vids on this topic....
hope this helps,
John
http://welding-tv.com/2014/01/28/6g-tes ... -309-tips/
Funny, as Jody just made some vids on this topic....
hope this helps,
John
Just a couple welders and a couple of big hammers and torches.
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
Hey,
Jody just made a video on this last week.
http://welding-tv.com/2014/01/21/6g-wel ... weld-test/
Mick
Jody just made a video on this last week.
http://welding-tv.com/2014/01/21/6g-wel ... weld-test/
Mick
- AKweldshop
-
Weldmonger
-
Posts:
-
Joined:Wed Oct 23, 2013 3:30 pm
-
Location:Palmer AK
Mick, you stole my link
Just a couple welders and a couple of big hammers and torches.
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
Hey,
We must have been on at the same minute, because yours wasnt there when i hit the button, but you beat me to the top of the thread. Strange. Better to double up than not answer at all, hey?
Mick
We must have been on at the same minute, because yours wasnt there when i hit the button, but you beat me to the top of the thread. Strange. Better to double up than not answer at all, hey?
Mick
- AKweldshop
-
Weldmonger
-
Posts:
-
Joined:Wed Oct 23, 2013 3:30 pm
-
Location:Palmer AK
mine was at 6:30pm, and yours at 2:52am.
How do you explain that?
John
How do you explain that?
John
Just a couple welders and a couple of big hammers and torches.
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
Hey,
Strange things happen in Australia. Maybe im just going crazy and i didnt see your post.
Mick
Strange things happen in Australia. Maybe im just going crazy and i didnt see your post.
Mick
- AKweldshop
-
Weldmonger
-
Posts:
-
Joined:Wed Oct 23, 2013 3:30 pm
-
Location:Palmer AK
Oh well, I can't fuss, your the Moderator
Just a couple welders and a couple of big hammers and torches.
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
- AKweldshop
-
Weldmonger
-
Posts:
-
Joined:Wed Oct 23, 2013 3:30 pm
-
Location:Palmer AK
Anyway, lets hope the videos help kmcarr.
John
John
Just a couple welders and a couple of big hammers and torches.
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
- AKweldshop
-
Weldmonger
-
Posts:
-
Joined:Wed Oct 23, 2013 3:30 pm
-
Location:Palmer AK
Anyway, I'd break back in under a different username
Just a couple welders and a couple of big hammers and torches.
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
- AKweldshop
-
Weldmonger
-
Posts:
-
Joined:Wed Oct 23, 2013 3:30 pm
-
Location:Palmer AK
Just a couple welders and a couple of big hammers and torches.
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
kmcarr1983
- kmcarr1983
-
New Member
-
Posts:
-
Joined:Thu Dec 05, 2013 6:22 pm
Thank you for the replys guys I have two chances to take this test my biggest problems is speed I played a bit practicing because I was frustrated n needed to do somethin else a bit seems like light weaving may help ill repost how Monday goes in class weather permitting
- AKweldshop
-
Weldmonger
-
Posts:
-
Joined:Wed Oct 23, 2013 3:30 pm
-
Location:Palmer AK
Good Luck mankmcarr1983 wrote:Thank you for the replys guys I have two chances to take this test my biggest problems is speed I played a bit practicing because I was frustrated n needed to do somethin else a bit seems like light weaving may help ill repost how Monday goes in class weather permitting
hang in there.
John
Just a couple welders and a couple of big hammers and torches.
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
kmcarr1983
- kmcarr1983
-
New Member
-
Posts:
-
Joined:Thu Dec 05, 2013 6:22 pm
So I took the test...... waiting on cwi to double check it but in did pass thank you for the help everyone
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
"LIKE"kmcarr1983 wrote:So I took the test...... waiting on cwi to double check it but in did pass thank you for the help everyone
Since this ain't FB, I thought I'd throw that out there.
Hope the double-check comes out on your side!
Remember always, it's not us. We didn't weld it, YOU did. All we can offer is words of experience and encouragement.
Steve S
- AKweldshop
-
Weldmonger
-
Posts:
-
Joined:Wed Oct 23, 2013 3:30 pm
-
Location:Palmer AK
Amen Otto,
kmcarr1983, we don't weld for people, we share our experiences and techniques....
you do the welding
~John
kmcarr1983, we don't weld for people, we share our experiences and techniques....
you do the welding
~John
Just a couple welders and a couple of big hammers and torches.
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities