[kmcarr1983]

Working on acquiring skills for 6g cert but I have a problem I'm right handed and on the "hard" side between the 5 &3 clock position I have very bad noticeable highs and lows tried varying heat tried changing my speed on the pass always use a file on the electrode for restart on the 7018 & 6016 my test is in 16 days which is in a trade school any suggestions would be appreciated

[admin]

If the problem is due to stops and starts all in one area then staggering them will help. You might even need to stop early now and then just to spread them out
Thx for posting

Jody


Sent from my iPhone using Tapatalk

[ksmrf]

the hardest part for me was the left hand side. the way i do it i can't see the puddle so its hard to see if my speed is alright.

[Mike]

Welcome to the forum 1983.