Roberto_236
- Roberto_236
-
New Member
-
Posts:
-
Joined:Sun Feb 12, 2017 7:50 pm
Hey guys, I'm wondering if a Lincoln power feeder 15m would work with a miller xmt 350?
I run an older LN7 off my Trailblazer and works great. When I first got the LN7 I looked everywhere for information about hooking the two up and found absolutely nothing except the wiring diagrams for both units. I bought a 14 pin plug on ebay and took my best guess at it. Didn't work but I switched two wires around and been running now for about 3 years now. Don't know if this information will help with your situation but .....