Welding Tips and Tricks

Jody Collier;

I enjoyed your review of 2% Lanthinated Tungsten Electrodes. So I went shopping locally for them at Airgas. Found the E3 on the shelf and purchased them after careful review of their characteristics.

I am hoping to get you to compare these with the 2% Lanthinated Electrodes under the same constraints (welders, settings etc. a you did i your first test.

Your help in this matter is greatly appreciated.

Hey, welcome to the forums! The MSDS for Radnor e3 electrodes says they are ~1.5% lanthanated. I think the electrode review in that video comparison covered 1.5 lanth, if i recall correctly.