[AshesToFlesh]

Hey there fellow welders! I am expected to test on either a C276 plate or pipe test, and I have never welded this kind of ss before. If you have any tips, on type of electrode, amperage, prep and anything else on how I could pass this test, that would be highly appreciated. I have welded ss before with 308/309. I am a construction boilermaker and most of my experience is in stick welding. Thanks c:

[Mike]

Welcome...

[Oscar]

Well for starters, you can forget what you know about SS because this is a nickel based alloy from the Hastelloy Series made (primarily) by Haynes International.

gonna link you to some info since I'm no pro...
http://bfy.tw/BwBc

https://www.youtube.com/watch?v=hKOzV93_PQM

[AshesToFlesh]

Well for starters, you can forget what you know about SS because this is a nickel based alloy from the Hastelloy Series made (primarily) by Haynes International.

gonna link you to some info since I'm no pro...
http://bfy.tw/BwBc

https://www.youtube.com/watch?v=hKOzV93_PQM

How does it differ besides the alloy content? How does it differ from welding it?

[PeteM]

I have no experience with it, but this is from the manufacturer-

http://www.haynesintl.com/alloys/fabric ... nd-joining

On the left of the page is a list of subjects with a more detailed run down of each when you click on them.

[AshesToFlesh]

I have no experience with it, but this is from the manufacturer-

http://www.haynesintl.com/alloys/fabric ... nd-joining

On the left of the page is a list of subjects with a more detailed run down of each when you click on them.

This actually helped a lot! Thank you