Page 1 of 1
Preheat 1055 steel?
Posted: Tue Jan 01, 2019 10:02 pm
by 77cruiser
Replacing the cutting edge on a bucket with 1055. Does it need some preheat?
Re: Preheat 1055 steel?
Posted: Thu Jan 03, 2019 12:23 am
by Poland308
If it’s above 60 F then maybe not. But if you preheat up to around 200F you will have better results.
Re: Preheat 1055 steel?
Posted: Thu Jan 03, 2019 10:44 am
by 77cruiser
Thank you.
Re: Preheat 1055 steel?
Posted: Thu Jan 03, 2019 6:03 pm
by Poland308