Page 1 of 1

46 Lincoln SA-200

Posted: Sun Mar 01, 2020 11:37 pm
by asoroka
Hey Guys,
Got a line on a 1946 Lincoln SA-200 I'll probably pick up this month. I'm having a hard time trying to find information on the machine and decide whether or not it will be a suitable one for me. It's sole purpose will be for general farm repair and non-critical fabrication. If anyone has any experience or pros/ cons, or what to look for/ red flags when purchasing one of these old machines I'm all ears!
Thanks

Sent from my KFKAWI using Tapatalk

Re: 46 Lincoln SA-200

Posted: Mon Mar 02, 2020 4:20 pm
by Poland308
They haven’t changed much in the last 100 years. There also isn’t a single part that can’t be repaired or replaced.

Re: 46 Lincoln SA-200

Posted: Thu Mar 05, 2020 9:58 pm
by vaguy101
asoroka wrote:Hey Guys,
Got a line on a 1946 Lincoln SA-200 I'll probably pick up this month. I'm having a hard time trying to find information on the machine and decide whether or not it will be a suitable one for me. It's sole purpose will be for general farm repair and non-critical fabrication. If anyone has any experience or pros/ cons, or what to look for/ red flags when purchasing one of these old machines I'm all ears!
Thanks

Sent from my KFKAWI using Tapatalk
46 sa 200 the only info you need to know is that if it runs and welds buy it . In about 10 years you won't be able to find them anymore .

Sent from my SM-G955U using Tapatalk

Re: 46 Lincoln SA-200

Posted: Fri Mar 06, 2020 2:07 am
by Arno
Fieldres using one to TIG with...

https://www.youtube.com/watch?v=Zu2glUXqeUo

Bye, Arno.