Page 1 of 1
amp suggestion
Posted: Fri Mar 17, 2023 6:15 pm
by tdawg46
I need to fillet weld 1/4 inch flat bar to 1/2 inch solid round bar with 1/8 7014. Can I get some suggestions on amperage? Lincoln tombstone ac/dc. Thanks
Re: amp suggestion
Posted: Fri Mar 24, 2023 9:32 am
by cj737
I run 120ish amps with 1/8 rods regardless of material thickness.
Re: amp suggestion
Posted: Wed Mar 29, 2023 6:19 pm
by tdawg46
Weldmonger, Thanks much for your advice.