Page 1 of 1
Hobart TR 250 is anyone familiar with this model?
Posted: Thu Apr 10, 2014 11:15 pm
by Jay P
Found this model on CL. AC/DC Stick 220 V but can't find any other info on it.
Re: Hobart TR 250 is anyone familiar with this model?
Posted: Fri Apr 11, 2014 6:27 am
by weldin mike 27
Hey mate, dont knowabout that one, dont have many Hobarts in Aus. Anyway, pop by the member intro page, and intro yourself.
Mick
Re: Hobart TR 250 is anyone familiar with this model?
Posted: Fri Apr 11, 2014 7:23 am
by paul_s
Welcome to the forum Jay P.
Re: Hobart TR 250 is anyone familiar with this model?
Posted: Fri Apr 11, 2014 10:33 am
by Mike
Welcome to the forum Jay P.
Re: Hobart TR 250 is anyone familiar with this model?
Posted: Fri Apr 11, 2014 12:44 pm
by AKweldshop
Well,
I found what I'm guessing your describing, if yours is around $400, with leads, tested by you, should be worth $400....
Those are some old machine.
There only hope is that they will run forever...
What comes with your machine???
Price???
~John
ps, Welcome to the forum.
Re: Hobart TR 250 is anyone familiar with this model?
Posted: Sat Apr 12, 2014 12:28 am
by Jay P
Thanks for all the welcomes. Price is $150.00 comes with leads.
The two things that are attractive here is that it is both AC and DC and the price. The unattractive part is that Hobart seems to not support it in any way anymore.
Re: Hobart TR 250 is anyone familiar with this model?
Posted: Sat Apr 12, 2014 1:42 am
by AKweldshop
If you can try at the guys place, and it welds good....
Buy it!!!!!
~John