error_outline JavaScript Disabled
Stick Welding Tips, Certification tests, machines, projects
Posts:
Joined:
Wed Oct 23, 2013 3:30 pm
Location:
Palmer AK
Sun Apr 27, 2014 2:02 am
Ok,
Uphill filet, 1 1/2 wide flat bar, 5/8 thick.
Lincoln Invertec 200.
1/8 7018 "cold"at 130amps.
This weld is 1 1/8 wide.
That's a 3/8 nut sitting on the weld.
Guess that breaks the "3 rod rule.
IMG_1712.JPG (123.87 KiB) Viewed 2035 times
IMG_1745.JPG (133.23 KiB) Viewed 2035 times
IMG_1746.JPG (120.12 KiB) Viewed 2035 times
Just a couple welders and a couple of big hammers and torches.
Posts:
Joined:
Wed Oct 23, 2013 3:30 pm
Location:
Palmer AK
Sun Apr 27, 2014 2:07 am
IMG_1723.JPG (112.2 KiB) Viewed 2034 times
Just a couple welders and a couple of big hammers and torches.
Sun Apr 27, 2014 7:22 am
Texas is a long way from alaska. The rules have stretched on the trip. Its a fine weld that will probably never break in a month of sundays, but causes inspectors to have kittens. That said, i did an 1" thick test plate with flux core, weaved right across the front, and every one went home safe that night. Lolz
Posts:
Joined:
Wed Oct 23, 2013 3:30 pm
Location:
Palmer AK
Thu Oct 16, 2014 3:44 pm
IMG_9944.JPG (92.94 KiB) Viewed 1749 times
Just a couple welders and a couple of big hammers and torches.
Fri Oct 24, 2014 12:46 am
Time to break out the 1/4" 7018 electrode. Single pass weave is that wide
Posts:
Joined:
Wed Oct 23, 2013 3:30 pm
Location:
Palmer AK
Fri Oct 24, 2014 12:48 am
soutthpaw wrote: Time to break out the 1/4" 7018 electrode. Single pass weave is that wide
Biggest I've ran(or ever needed) is 3/16" 7018.....
1/4" 7018 is for 3/4" plate and up....
Just a couple welders and a couple of big hammers and torches.
Fri Oct 24, 2014 12:49 am
AKweldshop wrote: soutthpaw wrote: Time to break out the 1/4" 7018 electrode. Single pass weave is that wide
Biggest I've ran(or ever needed) is 3/16" 7018.....
1/4" 7018 is for 3/4" plate and up....
Yeah but it's fun
