Stick Welding Tips, Certification tests, machines, projects
Barbequed 7018
Post Reply
User avatar
  • Posts:
  • Joined:
    Fri May 09, 2014 9:54 am
  • Location:
    Baton Rouge, LA

Has anyone tried Barbequed 7018's?
It seemed like a good idea at the time ...

I saw someone welding on some cast iron and they first barbequed that sucker, so I thought it might work for drying out some 7018?
Attachments
81UBEVTQ3xL._SL1500_.jpg
81UBEVTQ3xL._SL1500_.jpg (28.66 KiB) Viewed 4769 times
Airco Heliwelder, model 3A/DDR-224HPA/B-D
LWS Kobalt Helmet / Blue Flame HF
6010 Powdered Vise Grips
Bad A$$ Orange Grinder
Chicken Hammer for Pecking Divots
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

mbmalone wrote:Has anyone tried Barbequed 7018's?
It seemed like a good idea at the time ...

I saw someone welding on some cast iron and they first barbequed that sucker, so I thought it might work for drying out some 7018?


Buy one of these....
I got one a while back at a yard sale for $5.
Put a handful of rods in, and turn it on....

Image
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Sun Oct 27, 2013 10:57 pm
  • Location:
    Big Lake/Monticello MN, U.S.A.

AKweldshop wrote: Buy one of these....
I got one a while back at a yard sale for $5.
Put a handful of rods in, and turn it on....

Image

Yeah, and then when you weld you always smell "hot pockets" and leftovers :D
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

MinnesotaDave wrote:
AKweldshop wrote: Buy one of these....
I got one a while back at a yard sale for $5.
Put a handful of rods in, and turn it on....

Image

Yeah, and then when you weld you always smell "hot pockets" and leftovers :D

No,
"Rocky Mountain Oysters", if you get my drift. ;) 8-)
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Sun Oct 27, 2013 10:57 pm
  • Location:
    Big Lake/Monticello MN, U.S.A.

AKweldshop wrote:
MinnesotaDave wrote:
AKweldshop wrote: Buy one of these....
I got one a while back at a yard sale for $5.
Put a handful of rods in, and turn it on....

Image

Yeah, and then when you weld you always smell "hot pockets" and leftovers :D

No,
"Rocky Mountain Oysters", if you get my drift. ;) 8-)
Only when you buy them in Montana or Sturgis ;)
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

I missed the joke Dave.... :?
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Sun Oct 27, 2013 10:57 pm
  • Location:
    Big Lake/Monticello MN, U.S.A.

AKweldshop wrote:I missed the joke Dave.... :?
Those are the only places I saw Rocky Mountain Oysters.
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

MinnesotaDave wrote:
AKweldshop wrote:I missed the joke Dave.... :?
Those are the only places I saw Rocky Mountain Oysters.

Haha,
We've got lots of names for them...

Sack lunch is the best so far.. :lol:
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Sat Jul 06, 2013 11:16 am
  • Location:
    Near Pittsburgh,Pennsylvania. Steel Buckle of the Rust Belt

After watching John's farm videos, I don't even want to know what his toaster oven smells like, Yikes!

Len
Now go melt something.
Instagram @lenny_gforce

Len
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

I think we can all agree...

Eating "Rocky Mountain Oysters" certainly takes balls!
Top
User avatar
  • Posts:
  • Joined:
    Sun Oct 27, 2013 10:57 pm
  • Location:
    Big Lake/Monticello MN, U.S.A.

Otto Nobedder wrote:I think we can all agree...

Eating "Rocky Mountain Oysters" certainly takes balls!
Attachments
image.jpg
image.jpg (58.26 KiB) Viewed 4362 times
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Otto Nobedder wrote:I think we can all agree...

Eating "Rocky Mountain Oysters" certainly takes balls!

That's about the size of it....

You guys had better try them.

No worse for you than shrimp caviar.... :roll:
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

I am a cheap skate, if I was going to eat anything like that it would be deer balls, they're under a buck :lol:
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

mcoe wrote:I am a cheap skate, if I was going to eat anything like that it would be deer balls, they're under a buck :lol:
Hahaha!!
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Tue Jul 01, 2014 4:34 am
  • Location:
    Skiatook, Oklahoma

You sure they weren't cooking the cast piece?

Sent from my SM-G900R4 using Tapatalk
Top
DylanWelds
  • Posts:
  • Joined:
    Tue Feb 25, 2014 3:25 am
  • Location:
    Washington

If you have "wet" 7018 and Stick them to a piece of steel and let them heat up for like 5-10 seconds , will that take the moisture out and make them ready to use again? (Once they cool down)
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

DylanWelds wrote:If you have "wet" 7018 and Stick them to a piece of steel and let them heat up for like 5-10 seconds , will that take the moisture out and make them ready to use again? (Once they cool down)

Its a matter of opinion.....

Wouldn't meet code I'm sure.
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

DylanWelds wrote:If you have "wet" 7018 and Stick them to a piece of steel and let them heat up for like 5-10 seconds , will that take the moisture out and make them ready to use again? (Once they cool down)
John's right that it wouldn't meet code, but if they're freshly damp and haven't rusted under the flux, this method will drive off moisture, making them suitable for general-purpose work.

If, however, they're very wet... They may react like damp 308/309 rod, which behaves a bit like popcorn... If there's enough moisture, and it all boils at once, the flux will explode off the rod. I've never had this happen with 7018, but with the hard-composition flux, I'd imagine it's possible.

That, by the way, is a relatively safe prank to play on a fellow hand who's welding 308/309... Wet one pretty good (soak it for a minute...), wipe it dry, slip it in his rod bag, and wait for the fun. About 2-3 seconds in, three or four inches of flux will abruptly fly in all directions with a distinct "pop".

Steve S
Top
Post Reply

Return to “Stick Welding/Arc Welding - Shielded Metal Arc Welding”