Hey Guys,
I'm working with some "18-SR" stainless steel sheet metal and i'm wondering if anyone has had any experience with this and if anyone can help me track down the compatible filler rod AWS E/ER 18 Cb? We have been using the metal itself as a filler rod but would prefer to purchase some actual filler rod.
This is the metal composition
COMPOSITION (wt %)
Carbon 0.015 max.
Manganese 0.30 max.
Silicon 0.60 max.
Chromium 17.30
Nickel 0.25
Aluminum 1.7
Titanium 0.25 max
BMONEY_WELDS
- BMONEY_WELDS
-
New Member
-
Posts:
-
Joined:Thu Jan 18, 2018 10:05 pm
-
Location:Massachusetts
- LtBadd
-
Weldmonger
-
Posts:
-
Joined:Sun Apr 12, 2015 4:00 pm
-
Location:Clearwater FL
-
Contact:
I would call a supplier such as Washington Alloy Co, they can provide the correct information and locate a distributor as well.
Richard
Website
Website
BMONEY_WELDS
- BMONEY_WELDS
-
New Member
-
Posts:
-
Joined:Thu Jan 18, 2018 10:05 pm
-
Location:Massachusetts
LtBadd wrote:I would call a supplier such as Washington Alloy Co, they can provide the correct information and locate a distributor as well.
Thank you Sir!