Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
User avatar
  • Posts:
  • Joined:
    Mon Feb 09, 2015 4:48 pm
  • Location:
    St. Johns, Michigan

Awesome detail work man! I like it!!
Pete



Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
ljdm1956
  • Posts:
  • Joined:
    Wed Mar 19, 2014 6:29 pm
  • Location:
    East Durham, NY

Holy Crap! Fantastic detail. How long did it take to make it?
Lincoln Weld-Pak 180
Lincoln spool gun
Everlast PowerUltra 205p
AHP AlphaTig 200X
Assorted stuff
ignatz200
  • Posts:
  • Joined:
    Wed Sep 16, 2015 2:01 pm

That little sculpture was the result of about two weeks of effort.
The welding was done using my Weco 171T DC machine with a CK-9 and SSC foot pedal.
Most of the 'fill rod' was double-twisted lengths of mig wire due to the small working size.
What doesn't show is all the cutting and machining work.
If memory serves I spent something like four hours on the hands alone. Many of the other component 'parts' of the sculpture (table, flower, cat, etc) also represent some hefty chunks of quality time.
User avatar
  • Posts:
  • Joined:
    Mon Feb 09, 2015 4:48 pm
  • Location:
    St. Johns, Michigan

With all the detail in the hands I don't doubt that you had 4 hours into making them, you have more patients than I sir. :)
Pete



Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
Warrenh
  • Posts:
  • Joined:
    Thu Apr 27, 2017 12:31 pm

https://youtu.be/138NfRtqR8k

So this isnt really a what I welded today but this commercial features some of our work. The overhead sign that says "historic downtown port st joe" is ours, we also built the lighted marquee outside the theater and we rehabbed the letters on top of the theater that say "port theater".

Sent from my SCH-I545 using Tapatalk
User avatar
  • Posts:
  • Joined:
    Mon Feb 09, 2015 4:48 pm
  • Location:
    St. Johns, Michigan

Warrenh wrote:https://youtu.be/138NfRtqR8k

So this isnt really a what I welded today but this commercial features some of our work. The overhead sign that says "historic downtown port st joe" is ours, we also built the lighted marquee outside the theater and we rehabbed the letters on top of the theater that say "port theater".

Sent from my SCH-I545 using Tapatalk
Nice looking Signs Warren! :)
Pete



Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
Warrenh
  • Posts:
  • Joined:
    Thu Apr 27, 2017 12:31 pm

Thanks. I thought it was cool to see our stuff In a nationwide commercial. It was new for me. Lol

Sent from my SCH-I545 using Tapatalk
User avatar
  • Posts:
  • Joined:
    Mon Feb 09, 2015 4:48 pm
  • Location:
    St. Johns, Michigan

Yah no doubt! Can I have your autograph? hahaha :D
Pete



Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
  • Posts:
  • Joined:
    Sun Jan 15, 2017 1:08 am

Hey guys happy father's Day everybody! Here's some pictures from the last few weeks! Let me know if you have any questions. More then happy to help!ImageImageImageImageImageImageImageImageImage

Sent from my XT1635-01 using Tapatalk
User avatar
  • Posts:
  • Joined:
    Sun Nov 19, 2017 10:09 am

5th Street, How about helping with this thread: "Little help figuring out my restarts on TIG aluminium"?
Lincoln MP 210, Lincoln Square Wave 200,
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter

" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
User avatar
  • Posts:
  • Joined:
    Mon Feb 09, 2015 4:48 pm
  • Location:
    St. Johns, Michigan

Beautiful work as usual 5th!
Pete



Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
scoobymick
  • Posts:
  • Joined:
    Sun Apr 01, 2018 5:35 pm

Wow _ quality work there
reflexsa
  • Posts:
  • Joined:
    Wed Sep 20, 2017 2:16 am

Practiced a lap joint (3mm stainless steel) after getting inspired from listening to the WTT podcast. Unfortunately I didn't have any more material to continue practicing with so I could only do this one.
Some of the welds came out better than I have managed in the past so there is some progress. A week before I welded a 2mm aluminium box for a variable speed drive and noticed how quickly I lost the feel for that.
Practice practice practice. You really have to put in the hours to get good at something. Even so, the wealth of knowledge and resources available especially here and on Jody's channel make things a bit easier to understand.
Attachments
2.jpg
2.jpg (32.38 KiB) Viewed 4335 times
1.jpg
1.jpg (29.51 KiB) Viewed 4335 times
Furqan34
  • Posts:
  • Joined:
    Sat Jul 07, 2018 10:32 am

SPOKESY wrote:I'll start it off

Image

That's my work area where I do all of my pipe welding.

Hope we get some replies looking forward to pics :D .
NICE PICTURE
Warrenh
  • Posts:
  • Joined:
    Thu Apr 27, 2017 12:31 pm

Another poling platform with a leaning post. The top was 42x59. The outside ring for the top was made continuous with one weld to join it. ImageImageImageImageImage

Sent from my SCH-I545 using Tapatalk
User avatar
  • Posts:
  • Joined:
    Sun Nov 19, 2017 10:09 am

Do you fly fish? Looks beautiful!!!
Lincoln MP 210, Lincoln Square Wave 200,
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter

" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
Warrenh
  • Posts:
  • Joined:
    Thu Apr 27, 2017 12:31 pm

Thats a customers boat. They use it for charters. The platform is for poling the boat on the flats. I dont think they will be fishing up there.

Sent from my SCH-I545 using Tapatalk
User avatar
  • Posts:
  • Joined:
    Sun Nov 19, 2017 10:09 am

Warrenh wrote:Thats a customers boat. They use it for charters. The platform is for poling the boat on the flats. I dont think they will be fishing up there.

Sent from my SCH-I545 using Tapatalk
Yes I know. The guide poles the boat and the fisherman in on the bow casting to where the guide sees the fish. Most likely fly fishers.
Lincoln MP 210, Lincoln Square Wave 200,
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter

" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
User avatar

Excellent fab work there Warrenh
Richard
Website
Warrenh
  • Posts:
  • Joined:
    Thu Apr 27, 2017 12:31 pm

No we dont have bonefish up here and few tarpon. There are some guys who flyfish for redfish but not many. Mostly live bait.

Sent from my SCH-I545 using Tapatalk
User avatar
  • Posts:
  • Joined:
    Sat Feb 17, 2018 10:10 pm
  • Location:
    Carberry, Manitoba, Canada

Little around the house project for the missus on a Sunday afternoon. Somehow those are more satisfying than some big project at work for me.
Attachments
EBB54617-B968-45B7-8ED7-1C78AB0188C3.jpeg
EBB54617-B968-45B7-8ED7-1C78AB0188C3.jpeg (56.45 KiB) Viewed 4211 times
2B22AF0C-4474-4175-BE4C-61A58BF97D09.jpeg
2B22AF0C-4474-4175-BE4C-61A58BF97D09.jpeg (65.82 KiB) Viewed 4211 times
E691E260-6255-460D-948F-5040F5266BF2.jpeg
E691E260-6255-460D-948F-5040F5266BF2.jpeg (104.04 KiB) Viewed 4211 times
Warrenh
  • Posts:
  • Joined:
    Thu Apr 27, 2017 12:31 pm

Those look good. Glad my wife doesnt get on here. Id be making some.

Sent from my SCH-I545 using Tapatalk
User avatar

JayWal wrote:Little around the house project for the missus on a Sunday afternoon. Somehow those are more satisfying than some big project at work for me.
Looks nice
Are you using a bender, or a jig and oxy-acet torch?
Richard
Website
User avatar
  • Posts:
  • Joined:
    Sun Nov 19, 2017 10:09 am

JayWal wrote:Little around the house project for the missus on a Sunday afternoon. Somehow those are more satisfying than some big project at work for me.
So you DO have a honey do list!!!!! :shock: They are nice looking!
Lincoln MP 210, Lincoln Square Wave 200,
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter

" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
User avatar
  • Posts:
  • Joined:
    Sat Feb 17, 2018 10:10 pm
  • Location:
    Carberry, Manitoba, Canada

LtBadd wrote:
JayWal wrote:Little around the house project for the missus on a Sunday afternoon. Somehow those are more satisfying than some big project at work for me.
Looks nice
Are you using a bender, or a jig and oxy-acet torch?
This very high tech jig I liberated from a scrap pipe. O/A torch and wrapped it around. It’s a little trickier to get a smooth even circle than I thought. My first 2 tried were hexagonal more than round.

TD I do have a honey do list and I’m actually not even married :shock: just engaged. Thanks!
Attachments
EAB79645-A2B1-48B2-9900-77117B70803C.jpeg
EAB79645-A2B1-48B2-9900-77117B70803C.jpeg (58.29 KiB) Viewed 4119 times
Post Reply