Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
Cup melted - TIG
Post Reply
Bill52
  • Posts:
  • Joined:
    Thu Jan 28, 2021 3:44 am

First TIG 'welding'.

Setup:
- material: 4 mm mild steel
- type: DC
- current: 100 A
- electrode: 2.5mm 2% Ceriated
- polarity: positive handle
- cup: #5
- gas: pure argon
- flow: 7.5 l/min
- pre-flow: 1sec
- no filler

Result:
Well, can't call it a weld but the two pieces of material did melt together.
Also melt the tungsten and the bottom of the cup together into a ball.

Tried searching for 'tig cup melted' on google but nothing came up so far.

What am I doing wrong?
Thanks in advance.
Last edited by Bill52 on Sat Jan 30, 2021 11:39 pm, edited 1 time in total.
Top
User avatar
  • Posts:
  • Joined:
    Wed Jan 22, 2014 12:00 am
  • Location:
    Connecticut

Your polarity is backwards. The tungsten should be electrode negative.
Multimatic 255
Top
User avatar
  • Posts:
  • Joined:
    Sun Oct 27, 2013 10:57 pm
  • Location:
    Big Lake/Monticello MN, U.S.A.

Yep, what Louie said :)
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Top
walz10
  • Posts:
  • Joined:
    Sat Jan 16, 2021 10:55 pm

What the posts above said or possibly extreme porosity


Sent from my iPhone using Tapatalk
Top
walz10
  • Posts:
  • Joined:
    Sat Jan 16, 2021 10:55 pm

walz10 wrote:What the posts above said or possibly extreme porosity

Pictures really help


Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk
Top
User avatar
  • Posts:
  • Joined:
    Sat Feb 17, 2018 10:10 pm
  • Location:
    Carberry, Manitoba, Canada

Bill52 wrote:First TIG 'welding'.

Setup:
- material: 4 mm mild steel
- type: DC
- current: 100 A
- electrode: 2.5mm 2% Ceriated
- polarity: positive handle
- lens: #6
- gas: pure argon
- flow: 7.5 l/min
- pre-flow: 1sec
- no filler

Result:
Well, can't call it a weld but the two pieces of material did melt together.
Also melt the tungsten and the bottom of the lens together into a ball.

Tried searching for 'tig lens melted' on google but nothing came up so far.

What am I doing wrong?
Thanks in advance.
Had the same issue when I struck my first arc. After an hour Googling how to strike an arc I found out Tig torch should be negative. Works a lot better! [emoji846]

Sent from my SM-G970W using Tapatalk
Top
William Payne
  • Posts:
  • Joined:
    Sun Jan 17, 2021 6:15 am
  • Location:
    New Zealand

Yip TIG is EN electrode negative.

However post some pics I’d love to see this.
Miller Syncrowave 350LX
Esab Power Compact 205
BOC 185DC Tig
Top
Spartan
  • Posts:
  • Joined:
    Fri Mar 06, 2020 8:59 pm

Also consider upping your amps once you get the polarity sorted. 100A is quite low for 4mm thick steel.
Top
Bill52
  • Posts:
  • Joined:
    Thu Jan 28, 2021 3:44 am

JayWal wrote:However post some pics I’d love to see this.
As you asked for it ... my latest art work.
melted_gas-lens.png
melted_gas-lens.png (179.78 KiB) Viewed 2337 times
For those who didn't know, this is how to TIG weld gas-lenses.
I'm taking orders. Send me your perfect lens and receive something like this. :)

Haven't tried the reverse polarity yet. I'm sure it'll work. Better tan this one ...
Top
tweake
  • Posts:
  • Joined:
    Mon Dec 18, 2017 4:53 am
  • Location:
    New Zealand

its not actually a lens.
thats the cup and tungsten melted together.
i would go up a cup size or two.
tweak it until it breaks
Top
eelman308
  • Posts:
  • Joined:
    Tue Dec 29, 2020 10:34 pm
  • Location:
    Illinois....for now

:o
Top
Bill52
  • Posts:
  • Joined:
    Thu Jan 28, 2021 3:44 am

Well, the electrode-negative and the larger cup - #6 - worked.
Wouldn't call it a weld but the two pieces are not falling apart - it's a start.
Many thanks for all of you!
Top
Post Reply

Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”